
The AirTAC SC100 Standard Cylinder SC100X125S is a genuine double-acting standard air cylinder with a Ø100mm bore and 125mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X125S is a double-acting tie-rod cylinder with a 100 mm bore and 125 mm standard stroke, pre-equipped with a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors. It generates a push force of 3927 N at 0.5 MPa and reaches 7068 N at the 0.9 MPa maximum operating pressure, making it a robust actuator for medium-to-heavy linear tasks.
This model uses a 25 mm diameter piston rod with an M20x1.5 male thread and PT1/2 ports. The adjustable air cushion is 29 mm long, and the body length A is 188 mm, giving a total extended length of approximately 313 mm. The operating temperature range is -20 to +70 °C with standard TPU seals.
| Model | Airtac SC100 Standard Cylinder SC100X125S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa easily handles diverting medium-weight packages or totes on a conveyor line. The built-in magnet allows end-of-stroke sensing to confirm each divert cycle.
Ideal for pneumatic clamping in machining or welding fixtures. The 125 mm stroke provides ample clearance for part loading, and the sensor confirms the clamp is fully engaged before a cycle starts.
Use this cylinder as a heavy-duty pallet stop or a lift gate actuator. The M20x1.5 rod thread is robust enough for direct attachment of a stop block, and the magnetic piston enables position feedback.
Choose the SC100 bore when your application needs between 3927 N (at 0.5 MPa) and 7068 N (at 0.9 MPa) of push force. If your load is lighter, stepping down to an SC80 bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For a heavier load, an SC125 bore provides 6136 N at the same 0.5 MPa pressure.
For a direct replacement, match these five points exactly: 100 mm bore, 125 mm stroke, PT1/2 port thread, the built-in magnet (-S suffix), and the basic mounting style. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to another AirTAC SC100 of the same configuration.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard 0.5 MPa operating pressure, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
Yes. The -S suffix in SC100X125S indicates a built-in magnet in the piston. This allows you to clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel's tie-rod slots to detect piston position without any additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.