
The AirTAC SC100 Standard Cylinder SC100X125SCB is a genuine double-acting standard air cylinder with a Ø100mm bore and 125mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X125SCB is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa. Its 125 mm stroke and 25 mm diameter piston rod suit medium-travel clamping and pressing tasks where rear-pivoting mounting is required.
This model includes a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, plus a rear double clevis (CB) mount (F-SC100CB) that allows the cylinder body to pivot during operation. The adjustable air cushion (29 mm) decelerates the piston smoothly at end-of-stroke, protecting the end cap and reducing noise.
| Model | Airtac SC100 Standard Cylinder SC100X125SCB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa easily actuates diverter gates on medium-duty package sorting conveyors, with the CB clevis allowing the cylinder to pivot as the gate swings.
Delivers 7068 N of clamping force at 0.9 MPa for holding steel fabrications in position. The built-in magnet enables sensor confirmation of clamp engagement before the welding cycle starts.
Controls chute doors or flow gates on seed tenders and fertilizer spreaders. The rear clevis mount handles the arcing motion of linkage-actuated mechanisms in dusty field conditions.
Choose the SC100 bore when your application needs around 3927 N at 0.5 MPa—stepping down to an SC80 bore delivers 2513 N, while moving up to an SC125 provides 6136 N. For this 125 mm stroke, side loading is typically minimal, but always align the rod axis with the load path to prevent bending stress on the 25 mm rod.
For replacement, match five points: 100 mm bore, 125 mm stroke, PT port thread, CB rear double clevis mounting, and the -S magnet for sensor compatibility. This tie-rod cylinder is not dimensionally interchangeable with ISO 15552 profile cylinders.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At 0.7 MPa, push reaches 5497 N. The maximum operating push force at 0.9 MPa is 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 profile cylinder, so mounting dimensions and accessory interfaces differ. It is a direct replacement only for another AirTAC SC100 tie-rod cylinder matching the bore, stroke, PT ports, CB rear clevis mount, and -S magnet option.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.