verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC100 Standard Cylinder SC100X125SH

The AirTAC SC100 Standard Cylinder SC100X125SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 125mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ100 mm
  • Stroke125 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$138.87 $146.37Save 5% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC100 stroke, mounting and version on one page All SC100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC100 Standard Cylinder SC100X125SH

The SC100X125SH is a double-acting pneumatic cylinder delivering a push force of 3927 N at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 125 mm stroke and a 25 mm diameter piston rod, it is built for mid-range linear actuation tasks where high thermal resistance is required.

This model features a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke or mid-stroke position sensing. The -H suffix specifies Viton (FKM) seals, extending the operating temperature range from the standard -20–+70 °C up to 0–+150 °C, making it suitable for autoclaves, foundries, and other high-heat environments.

Airtac SC100 Standard Cylinder SC100X125SH Technical Specifications

ModelAirtac SC100 Standard Cylinder SC100X125SH
SeriesSC standard tie-rod cylinder
Bore sizeØ100 mm
Stroke125 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (approx.)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC100 Standard Cylinder SC100X125SH

SCStandard tie-rod cylinder series.
100Bore size in mm.
×125Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC100 Standard Cylinder SC100X125SH Is Used

local_fire_department

High-Temperature Process Automation

Viton seals allow continuous operation at up to 150°C, making this cylinder ideal for actuating dampers, gates, or clamps in ovens, autoclaves, and heat-treating lines.

conveyor_belt

Heavy Part Sorting & Rejection

With 3927 N of push force at 0.5 MPa, the SC100X125SH can reliably divert or reject heavy packages and components on high-speed conveyor systems.

precision_manufacturing

Press & Clamping Stations

The integrated magnetic piston enables precise sensor feedback for automated pressing, gluing, or ultrasonic welding fixtures requiring consistent stroke confirmation.

Is the Airtac SC100 Standard Cylinder SC100X125SH the Right Cylinder?

Select the SC100 bore when your application needs roughly 4000 N of force at standard plant pressure. If you need a lighter, more compact actuator, stepping down to an SC80 bore provides 2513 N of push force at the same 0.5 MPa. For heavy side loads or strokes beyond 300 mm, consider an external guide rail to protect the 25 mm rod from bending stress.

For direct replacement, match these five points: 100 mm bore, 125 mm stroke, PT port thread, the built-in magnet (-S) for sensor compatibility, and the Viton seal material for high-temperature operation. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC series units.

AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC100 Standard Cylinder SC100X125SH FAQ

At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.

No. The SC series is a tie-rod cylinder and has a shorter overall body length than an ISO 15552 cylinder of the same bore and stroke. It is dimensionally interchangeable only with another AirTAC SC tie-rod cylinder matching the 100 mm bore, 125 mm stroke, PT ports, magnet option, and Viton seals.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC100 Standard Cylinder SC100X125SH

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SC100X125SH and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.