
The AirTAC SC100 Standard Cylinder SC100X125SN is a genuine double-acting standard air cylinder with a Ø100mm bore and 125mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X125SN is a double-acting tie-rod cylinder delivering 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 125 mm stroke suit medium-travel clamping and pressing tasks. The 25 mm piston rod, PT1/2 ports, and 29 mm adjustable air cushion provide smooth deceleration.
This model is fitted with NBR (nitrile) seals, making it a cost-effective choice for general industrial environments within the standard -20 to +70 °C range. The body length A is 188 mm, giving a compact footprint for its force class. As a genuine AirTAC SC series unit, it offers reliable performance for everyday automation.
| Model | Airtac SC100 Standard Cylinder SC100X125SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Raises and lowers heavy pallet stops on conveyor lines. The 3927 N push force at 0.5 MPa easily handles loaded pallets, while the adjustable cushion reduces impact at end of stroke.
Powers pneumatic clamps on CNC machining centres and welding jigs. The 125 mm stroke provides ample clearance for part loading, and the NBR seals suit standard shop air conditions.
Operates a sliding gate or press platen on small compactors. Delivers up to 7068 N at 0.9 MPa for dense material compression, with tie-rod construction allowing easy maintenance access.
Choose the SC100 bore when your application needs around 3927 N at 0.5 MPa. If you can work with roughly 2513 N, stepping down to an SC80 reduces air consumption and physical size. For higher force, the SC125 delivers 6136 N at the same pressure. Always match replacement cylinders on five points: bore, stroke, PT port thread, basic mounting (no bracket), and the absence of a magnet.
For this 125 mm stroke, the rod bearing is well-supported within the standard stroke range, so side-load concerns are minimal under normal alignment. If the load applies a radial force, an external guide rod or linear rail is still recommended to protect the piston rod and bearing seals.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes, if the original is a tie-rod SC series cylinder with 100 mm bore, 125 mm stroke, PT1/2 ports, basic mounting (no brackets), and no magnet. This SN variant uses NBR seals, so confirm the original seal material is compatible with your operating temperature and fluid.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.