
The AirTAC SC100 Standard Cylinder SC100X125TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 125mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X125TC is a double-acting pneumatic cylinder delivering a robust 3927 N push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 125 mm stroke suit medium-travel clamping and pressing tasks where the centre trunnion mount allows the cylinder body to pivot during actuation.
This model includes the TC centre trunnion mounting (F-SC100TC) supplied with the TCM1 bracket, enabling angular motion for swinging loads. The 25 mm diameter piston rod and 29 mm adjustable air cushion at each end provide reliable deceleration, while PT1/2 ports ensure straightforward pneumatic connections.
| Model | Airtac SC100 Standard Cylinder SC100X125TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The TC centre trunnion mount lets the SC100X125TC swing a diverter gate on a packaging line, directing cartons between lanes with 3927 N of force at standard line pressure.
Delivers 7068 N of clamping force at 0.9 MPa to hold automotive stampings during robotic welding, with the trunnion allowing the cylinder to self-align as the clamp arm closes.
Pivots a small material hopper to discharge bulk goods. The adjustable air cushion at each end of the 125 mm stroke softens the stop when the hopper reaches its tilt limit.
Choose the SC100X125TC when your application needs a pivoting cylinder with around 3927 N of force. If the load requires less thrust, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa; for higher force demands, step up to the 125 mm bore (6136 N at 0.5 MPa). The centre trunnion mount is ideal for applications where the cylinder must arc through an angle.
For a direct replacement, match five key points: 100 mm bore, 125 mm stroke, PT port thread, TC centre trunnion mounting with TCM1 bracket, and the standard non-magnetic piston. This is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes, the TC suffix means this model includes the centre trunnion mount (F-SC100TC) and TCM1 bracket, designed specifically to allow the cylinder body to pivot. Ensure the mounting pins are sized for the reaction forces.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.