
The AirTAC SC100 Standard Cylinder SC100X1280S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1280mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1280S is a double-acting single-rod pneumatic cylinder delivering 3927 N push force at 0.5 MPa and up to 7068 N at 0.9 MPa. Its 1280 mm stroke fits within the standard maximum for the 100 mm bore, and the body length A of 188 mm keeps the overall envelope compact for a tie-rod design.
The built-in magnet (-S suffix) allows CMSG, DMSG, or EMSG sensors to clamp directly onto the barrel for non-contact position sensing. With a 25 mm diameter piston rod, PT1/2 ports, and an adjustable air cushion of 29 mm, this cylinder is suited for medium-to-heavy linear actuation tasks that require reliable end-of-stroke deceleration.
| Model | Airtac SC100 Standard Cylinder SC100X1280S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1280 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1280 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Long-stroke 1280 mm reach for shifting heavy pallets or bins between conveyor lanes in automated warehouses.
Delivers up to 7068 N at 0.9 MPa for heavy-duty clamping fixtures or indexing tables in metal fabrication cells.
Provides the sustained push force needed to compact recyclable materials in balers, with sensor feedback from the built-in magnet.
Choose the SC100 when the 50 mm bore's 982 N at 0.5 MPa is insufficient but the 125 mm bore's 6136 N is excessive. For this 1280 mm stroke, ensure the rod is protected from side loads—an external linear guide or a guided cylinder variant is strongly recommended to prevent rod bending and premature bearing wear.
When replacing an existing unit, match five points: 100 mm bore, 1280 mm stroke, PT port thread, the built-in magnet (-S), and the basic mounting configuration. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profile cylinders.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa the cylinder pushes with 3927 N and pulls with 3681 N. At 0.7 MPa push force rises to 5497 N, and at the maximum operating pressure of 0.9 MPa it reaches 7068 N.
Yes, the -S suffix indicates a magnet is embedded in the piston. Use AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors, which clamp onto the barrel tie-rods to detect piston position without penetrating the pressure envelope.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.