
The AirTAC SC100 Standard Cylinder SC100X1290 is a genuine double-acting standard air cylinder with a Ø100mm bore and 1290mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1290 is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and a 1290 mm stroke, this model is built for applications requiring a long linear reach with substantial thrust. The 25 mm diameter piston rod and 29 mm adjustable air cushion at each end provide smooth deceleration even under high inertial loads.
This cylinder uses a PT1/2 port and an M20x1.5 rod thread, with a body length A of 188 mm. The total extended length is approximately 1478 mm. As a genuine AirTAC SC series unit, it is a tie-rod design that is shorter than an equivalent ISO 15552 cylinder, making it a direct replacement only for other AirTAC SC100 cylinders with matching stroke, port, and mounting configuration.
| Model | Airtac SC100 Standard Cylinder SC100X1290 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1290 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1290 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Moves heavy pallets across long conveyor transfer stations, using the 1290 mm stroke to bridge gaps between roller beds with 3927 N of push force at standard line pressure.
Pushes large wooden panels or metal sheets off a production line. The long stroke clears the workpiece completely from the conveyor, while the adjustable cushion absorbs the kinetic energy of the moving mass.
Provides the clamping force for large assembly jigs, retracting fully to allow easy part loading. The 7068 N force at 0.9 MPa ensures a rigid hold during welding or fastening operations.
Select the SC100X1290 when the SC80's 2513 N push force at 0.5 MPa is insufficient for the load, but the application does not yet require the SC125's 6136 N. For this 1290 mm stroke, which is long but within the 1500 mm maximum standard stroke for bore 100, side-load management is critical. An unsupported 25 mm rod at full extension is susceptible to bending under lateral forces; use an external linear guide or ensure the load is purely axial to prevent rod bearing damage and seal wear.
To replace an existing cylinder, match five points: 100 mm bore, 1290 mm stroke, PT1/2 port thread, basic mounting (no accessory bracket), and the absence of a built-in magnet. This model uses the default TPU seals with an operating temperature range of -20 to +70 °C.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The SC100X1290 is a double-acting cylinder and will drift or drop if air pressure is exhausted or the directional valve is centered. To hold a load safely without live pressure, you must add an external mechanical lock, a rod brake, or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.