Airtac SC100 Standard Cylinder SC100X1300
The AirTAC Airtac SC100 Standard Cylinder SC100X1300 is a genuine double-acting standard air cylinder with a Ø100mm bore and 1300mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1300 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1300
The SC100X1300 is a robust double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a 1300 mm stroke, this tie-rod cylinder features a 25 mm diameter piston rod and PT1/2 threaded ports, making it well-suited for demanding linear motion tasks that require substantial force over a long travel distance.
Built with an adjustable pneumatic cushion at both ends (29 mm length) and a body length A of 188 mm, the total extended length reaches approximately 1488 mm. The standard TPU seals provide reliable operation in ambient temperatures from -20 to +70 °C, and the unit is proof-tested to 1.5 MPa for safety assurance.
Airtac SC100 Standard Cylinder SC100X1300 Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1300 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1300
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1300 Is Used
Pallet Handling
Provides the long 1300 mm reach and 3927 N force at 0.5 MPa to push heavy pallets across conveyor transfers in distribution centers.
Press Feeding
Delivers consistent 7068 N of force at 0.9 MPa to feed large sheet metal blanks into a stamping press over an extended stroke.
Agricultural Machinery
Actuates heavy gates or chutes on harvesters and spreaders, using the 1300 mm stroke for full-range motion in dusty conditions.
Is the Airtac SC100 Standard Cylinder SC100X1300 the Right Cylinder?
Selecting the SC100X1300 means matching its 100 mm bore and 1300 mm stroke to your application. If you need more force, the SC125 bore offers 6136 N at 0.5 MPa; for a more compact build, the SC80 provides 2513 N. For this long 1300 mm stroke, side loads must be carefully managed to prevent rod bending; consider an external linear guide or a guided cylinder if the load is not perfectly axial. To ensure a correct replacement, match five key points: the 100 mm bore, the 1300 mm stroke, the PT1/2 port thread, the basic (no bracket) mounting configuration, and the absence of a built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1300 FAQ
At 0.7 MPa (7 bar) operating pressure, the SC100X1300 double-acting cylinder generates a theoretical push force of 5497 Newtons.
No, the AirTAC SC series is a tie-rod cylinder with a shorter body length than a standard ISO 15552 cylinder. It is not dimensionally interchangeable. Replace it only with another AirTAC SC100 cylinder matching the 1300 mm stroke, PT1/2 ports, and basic mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1300
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.