
The AirTAC SC100 Standard Cylinder SC100X1300S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1300mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X1300S is a double-acting single-rod pneumatic cylinder from the AirTAC SC tie-rod series, delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the 0.9 MPa maximum operating pressure. With a 100 mm bore, 25 mm piston rod, and PT1/2 ports, this model includes a built-in magnet (suffix -S) for direct mounting of CMSG/DMSG/EMSG sensors.
This 1300 mm stroke unit features a 29 mm adjustable air cushion at each end to decelerate the piston smoothly. The body length A is 188 mm, giving a total extended length of approximately 1488 mm. It is a genuine AirTAC SC cylinder, designed as a shorter, non-ISO 15552 tie-rod actuator for industrial automation tasks requiring long linear travel.
| Model | Airtac SC100 Standard Cylinder SC100X1300S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 1300 mm stroke moves large panels, doors, or bins across wide conveyor gaps. The built-in magnet allows end-of-stroke sensing to sequence gates or stops reliably.
Provides 7068 N of clamping force at 0.9 MPa for holding large fabrications. The adjustable cushion protects the cylinder and fixture from impact at high cycle rates.
Pushes heavy pallets or totes off accumulation lanes. The magnetic piston enables mid-stroke sensor positioning for partial-stroke sorting operations.
Choose the SC100 bore when your application needs roughly 3927 N push at 0.5 MPa; if you can work with about 2513 N, stepping down to an SC80 reduces size and air consumption, while moving up to an SC125 provides 6136 N for heavier loads. For this 1300 mm stroke, side-load management is critical—an unsupported 25 mm rod at full extension is vulnerable to bending under lateral force, so consider an external linear guide or a guided cylinder if the load is not perfectly axial.
To replace an existing SC100X1300S, match five points exactly: 100 mm bore, 1300 mm stroke, PT1/2 port thread, the built-in magnet (-S), and the basic (no bracket) mounting configuration. The SC is a tie-rod cylinder and will not drop into ISO 15552 footprints.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard 0.5 MPa operating pressure, the cylinder produces 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100X1300S is a double-acting cylinder and will drift or drop if pressure is lost or the directional valve is centered. To hold a position or load without live pressure, you must add a pilot-operated check valve, external rod lock, or mechanical brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.