verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC100 Standard Cylinder SC100X1300SLB

The AirTAC SC100 Standard Cylinder SC100X1300SLB is a genuine double-acting standard air cylinder with a Ø100mm bore and 1300mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ100 mm
  • Stroke1300 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$332.90 $340.40Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC100 stroke, mounting and version on one page All SC100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC100 Standard Cylinder SC100X1300SLB

The AirTAC SC100X1300SLB is a double-acting tie-rod cylinder delivering a substantial 3927 N of push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a 1300 mm stroke, this model is built for long linear movements in heavy-duty automation, featuring a 25 mm diameter piston rod and an adjustable air cushion of 29 mm to decelerate the load smoothly at end-of-stroke.

This specific configuration includes a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, and an LB foot mount (F-SC100LB) for secure axial surface installation. The body length A is 188 mm, giving a total extended length of approximately 1488 mm. It uses the standard PT1/2 port thread and TPU seals for an operating temperature range of -20 to +70 °C.

Airtac SC100 Standard Cylinder SC100X1300SLB Technical Specifications

ModelAirtac SC100 Standard Cylinder SC100X1300SLB
SeriesSC standard tie-rod cylinder
Bore sizeØ100 mm
Stroke1300 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (approx.)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC100 Standard Cylinder SC100X1300SLB

SCStandard tie-rod cylinder series.
100Bore size in mm.
×1300Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC100 Standard Cylinder SC100X1300SLB Is Used

conveyor_belt

Long-Stroke Material Transfer

The 1300 mm stroke and 3927 N push force at 0.5 MPa are ideal for transferring heavy pallets or large components between distant conveyor stations in packaging lines.

precision_manufacturing

Heavy-Duty Clamping & Fixturing

With up to 7068 N of force at 0.9 MPa, this cylinder provides the robust clamping power needed for holding large weldments or castings during machining operations.

warehouse

Automated Warehouse Pushers

The combination of a long stroke and high force makes it suitable for pusher systems that sort or divert heavy cartons and totes on wide roller beds in logistics centers.

Is the Airtac SC100 Standard Cylinder SC100X1300SLB the Right Cylinder?

Choose the SC100X1300SLB when your application demands a push force around 3927 N at standard plant pressure. If a lower force is sufficient, stepping down to the SC80 bore reduces push force to 2513 N at 0.5 MPa, potentially saving space and air consumption. For a significant force increase, the SC125 bore provides 6136 N at the same pressure.

At a 1300 mm stroke, the rod is fully extended far from the bearing, making it susceptible to bending under side loads. Always guide the load externally with rails or use a guided cylinder configuration to protect the rod and seals. For a direct replacement, match the 100 mm bore, 1300 mm stroke, PT1/2 port thread, LB foot mount, and the built-in magnet for sensor compatibility.

AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC100 Standard Cylinder SC100X1300SLB FAQ

At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.

For a stroke of 1300 mm, side loading must be strictly avoided. The load must be externally guided on linear rails or bearings to absorb all transverse forces. The cylinder rod should only provide push/pull motion. If external guidance is not possible, consider using a guided cylinder or adding a rod support.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC100 Standard Cylinder SC100X1300SLB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SC100X1300SLB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.