
The AirTAC SC100 Standard Cylinder SC100X1300TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 1300mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1300TC is a double-acting single-rod pneumatic cylinder delivering 3927 N push force at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a long 1300 mm stroke, it features a 25 mm diameter piston rod, PT1/2 ports, and an adjustable air cushion length of 29 mm to decelerate end-of-stroke impact.
This model is configured with a centre trunnion (TC) mount, supplied with the TCM1 bracket (F-SC100TC), allowing the cylinder to pivot during operation for swinging or articulating loads. The standard TPU seals provide a reliable operating temperature range of -20 to +70 °C, and the body length A is 188 mm, resulting in a total extended length of approximately 1488 mm.
| Model | Airtac SC100 Standard Cylinder SC100X1300TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1300 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 1300 mm stroke and 3927 N push force are ideal for long-distance part transfer, pusher arms, and conveyor diverters where a pivoting trunnion mount is required.
Delivers up to 7068 N of clamping force for large workpieces in welding fixtures or assembly jigs, with the TC mount allowing the cylinder body to self-align.
Suitable for controlling chutes, gates, or levers on heavy-duty agricultural machinery, providing robust force and a long, sweeping stroke for remote actuation.
Select the SC100 when your application requires a push force between 3927 N and 7068 N. For a step down in force, the SC80 bore provides 2513 N at 0.5 MPa in a smaller envelope. For a step up, the SC125 bore offers 6136 N at 0.5 MPa. When replacing an existing cylinder, ensure a 5-point match: 100 mm bore, 1300 mm stroke, PT1/2 port thread, centre trunnion (TC) mounting with the F-SC100TC bracket, and no built-in magnet.
For this 1300 mm stroke, side-load management is critical. The long, unsupported 25 mm rod is susceptible to bending under lateral forces. Always use an external linear guide or rod support to absorb side loads, preventing premature rod bearing wear and ensuring consistent, reliable actuation.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
The theoretical push force at 0.5 MPa (5 bar) is 3927 N, and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
For strokes of 300 mm or more, never subject the rod to direct side loads. Install an external linear guide rail or rod support to carry the lateral forces. The cylinder should only provide push/pull motion along its axis to prevent rod bending and bearing damage.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.