verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC100 Standard Cylinder SC100X130STC

The AirTAC SC100 Standard Cylinder SC100X130STC is a genuine double-acting standard air cylinder with a Ø100mm bore and 130mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ100 mm
  • Stroke130 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$142.59 $150.09Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC100 stroke, mounting and version on one page All SC100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC100 Standard Cylinder SC100X130STC

The SC100X130STC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa, rising to 7068 N at the 0.9 MPa maximum operating pressure. With a 100 mm bore and 130 mm stroke, this model includes a built-in magnet for mounting CMSG/DMSG/EMSG sensors directly on the tie-rod barrel, and is supplied with a TC centre trunnion mount for pivoting applications.

This genuine AirTAC SC series cylinder features a 25 mm diameter piston rod with M20x1.5 threads and PT1/2 ports. The adjustable air cushion (29 mm length) decelerates the piston at end-of-stroke, protecting your equipment from impact. Its total extended body length is approximately 318 mm, making it a compact choice for medium-stroke, high-force actuation.

Airtac SC100 Standard Cylinder SC100X130STC Technical Specifications

ModelAirtac SC100 Standard Cylinder SC100X130STC
SeriesSC standard tie-rod cylinder
Bore sizeØ100 mm
Stroke130 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (approx.)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC100 Standard Cylinder SC100X130STC

SCStandard tie-rod cylinder series.
100Bore size in mm.
×130Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC100 Standard Cylinder SC100X130STC Is Used

conveyor_belt

Conveyor Diverters

The 130 mm stroke and 3927 N push force at 0.5 MPa efficiently actuates heavy-duty diverter gates on wide conveyors, directing packages or bulk materials. The TC trunnion mount handles the pivoting motion required by flipper-style gates.

precision_manufacturing

Welding Fixture Clamping

With 7068 N of force at 0.9 MPa, this cylinder provides powerful, consistent clamping for large weldments. The built-in magnet allows dual CMSG sensors to confirm full clamp and release positions, integrating seamlessly with automated welding cell controls.

agriculture

Agricultural Implement Control

Controls chute rotation or hopper doors on large agricultural equipment. The centre trunnion mount absorbs the swinging load, while the tie-rod construction and TPU seals withstand dusty, outdoor conditions within the -20 to +70 °C range.

Is the Airtac SC100 Standard Cylinder SC100X130STC the Right Cylinder?

Select the SC100X130STC when your application needs approximately 3927 N of force at standard plant pressure. For lower force requirements, consider stepping down to an 80 mm bore (2513 N push at 0.5 MPa); for heavier loads, a 125 mm bore provides 6136 N. The TC centre trunnion mount (F-SC100TC) allows the cylinder to pivot during its stroke, ideal for swinging or articulating loads.

To ensure a direct replacement, match these five points: 100 mm bore, 130 mm stroke, PT port thread, the TC centre trunnion mounting accessory, and the built-in magnet (-S) for sensor compatibility. This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC series cylinders of the same configuration.

AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC100 Standard Cylinder SC100X130STC FAQ

At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.

No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 profile cylinder of the same bore and stroke. It is a direct dimensional replacement only for another AirTAC SC100 tie-rod cylinder with the same stroke, PT ports, TC mount, and magnet option.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC100 Standard Cylinder SC100X130STC

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SC100X130STC and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.