
The AirTAC SC100 Standard Cylinder SC100X1320S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1320mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X1320S is a double-acting single-rod pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and an extended 1320 mm stroke, it is built for applications requiring a long linear reach and substantial force, such as material transfer or heavy-duty clamping.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for contactless position feedback. The cylinder features a 25 mm diameter piston rod, PT1/2 port threads, and a 29 mm adjustable air cushion to decelerate the moving mass at end-of-stroke.
| Model | Airtac SC100 Standard Cylinder SC100X1320S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1320 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1320 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 1320 mm stroke and 3927 N push force at 0.5 MPa move heavy totes or panels across wide conveyor gaps or between roller beds, with magnetic sensors confirming full extension and retraction.
Generates up to 7068 N of clamping force at 0.9 MPa for welding fixtures or assembly jigs. The built-in magnet enables sensor verification of clamp position to prevent cycle-start errors.
Provides the long vertical stroke needed for layer picking or pallet dispenser lifts. The adjustable cushion softens the stop under high inertial loads, protecting the cylinder and the load.
Choose the SC100 when your application needs around 4000 N of force at standard plant pressure. If your load is lighter, stepping down to an SC80 bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For strokes over 300 mm like this 1320 mm unit, always evaluate side-loading: the long, 25 mm rod is subject to bending moments. Use an external linear guide or rod-alignment coupler to prevent rod bearing wear and ensure smooth operation.
For a direct replacement, match these five attributes: 100 mm bore, 1320 mm stroke, PT1/2 port thread, the built-in magnet for sensor mounting, and the basic (no-bracket) mounting configuration. This tie-rod cylinder is shorter than an ISO 15552 profile, so it is not dimensionally interchangeable with ISO 15552 cylinders.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa (5 bar) air pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
A 1320 mm stroke with a 25 mm rod is susceptible to bending under side load. Always install an external linear guide rail or a rod-alignment coupler to absorb transverse forces. This protects the rod bearing and piston seals, preventing premature wear or rod buckling.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.