
The AirTAC SC100 Standard Cylinder SC100X133S is a genuine double-acting standard air cylinder with a Ø100mm bore and 133mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X133S delivers a substantial 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa), making it a workhorse for medium-to-heavy pneumatic tasks needing a 133 mm stroke. Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth deceleration, protecting tooling at end-of-travel.
This model includes the factory-installed -S magnet, so CMSG/DMSG/EMSG reed or solid-state sensors clamp directly onto the tie-rod barrel for reliable, non-contact position feedback. The SC100 is a double-acting, tie-rod cylinder with PT1/2 ports, designed for filtered air up to 1.0 MPa.
| Model | Airtac SC100 Standard Cylinder SC100X133S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 133 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×133 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Provides 3927 N at 0.5 MPa to raise or stop heavy pallets on conveyor lines, with magnetic sensors confirming position for interlocked transfer sequences.
Delivers consistent clamping force for CNC fixtures or welding jigs. The 133 mm stroke retracts the clamp fully for easy part loading and unloading.
Generates up to 7068 N at 0.9 MPa for light press-fit or riveting operations. The adjustable cushion minimises impact shock, extending tooling life.
Choose the SC100 when the SC80's 2513 N at 0.5 MPa is borderline for your load. If you need more force, the SC125 steps up to 6136 N at 0.5 MPa. For replacement, match five points: 100 mm bore, 133 mm stroke, PT port thread, the -S magnet for sensor mounting, and your required mounting accessory (this unit is basic, so order F-SC100LB/FA/FB/CA/CB/TC separately if needed). At 133 mm stroke, the rod is well-supported, but always centre the load axially to avoid side-load wear on the rod bearing.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.7 MPa, the push force is 5497 N. The pull force at the same pressure is 3681 N. These values are from the official AirTAC SC series thrust table for 100 mm bore.
Yes. The -S suffix means a magnet is built into the piston. You can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel to detect end-of-stroke or intermediate positions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.