
The AirTAC SC100 Standard Cylinder SC100X1350 is a genuine double-acting standard air cylinder with a Ø100mm bore and 1350mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X1350 is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with an extended 1350 mm stroke. At 0.5 MPa operating pressure it generates 3927 N of push force and 3681 N on the pull stroke, driven by a 25 mm diameter piston rod.
This model features a 29 mm adjustable air cushion at each end to decelerate the piston smoothly, reducing end-of-stroke impact. The body length A is 188 mm, giving a total extended length of approximately 1538 mm. Standard PT1/2 ports and an M20x1.5 rod thread are fitted, with TPU seals for a -20 to +70 °C working range.
| Model | Airtac SC100 Standard Cylinder SC100X1350 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1350 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 1350 mm stroke pushes or pulls bins, pallets, or components across wide conveyor gaps or transfer stations, where a shorter cylinder would require a complex linkage.
Delivers 3927 N at 0.5 MPa to advance heavy steel strip or sheet through a multi-stage stamping press, with the adjustable cushion protecting tooling at each end of the long stroke.
Opens and closes large hopper gates, diverter chutes, or ventilation dampers in bulk handling and processing plants, using the cylinder's full 1350 mm travel for complete shut-off.
Choose the SC100 bore when your application needs around 3927 N of thrust at standard plant pressure; for lighter loads the SC80 bore provides 2513 N at 0.5 MPa, while stepping up to the SC125 delivers 6136 N. Always confirm the port thread (PT or G), mounting style, and whether a magnet is required for sensor mounting.
With a 1350 mm stroke, the unsupported rod length is significant. Any side load, even a small one, can cause rod bending or premature bearing wear. Fit an external guide rail or rod-alignment coupler, or consider a guided cylinder if the load is not perfectly axial. For a direct replacement, match these five points: 100 mm bore, 1350 mm stroke, PT1/2 ports, basic mounting, and no magnet.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa (5 bar) the cylinder produces 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Only if the load is perfectly axial and the rod is not subjected to any side force. For a 1350 mm stroke on a 25 mm rod, even minor misalignment can cause bending. We strongly recommend an external guide rail or a self-guided coupling to protect the rod and bearing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.