Airtac SC100 Standard Cylinder SC100X1350S
The AirTAC Airtac SC100 Standard Cylinder SC100X1350S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1350mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1350 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1350S
The AirTAC SC100X1350S is a double-acting single-rod tie-rod cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa operating pressure. Its 1350 mm stroke falls within the standard range for the 100 mm bore, making it a ready-to-order solution for long-travel linear actuation without the lead time of a made-to-order unit.
This model features a 25 mm diameter piston rod with M20x1.5 male threads and PT1/2 pneumatic ports. The built-in magnet (-S suffix) allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the barrel for precise, non-contact end-of-stroke or mid-stroke position feedback. The adjustable air cushion at each end, with a 29 mm cushion length, decelerates the piston smoothly to reduce impact energy and noise.
Airtac SC100 Standard Cylinder SC100X1350S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1350S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1350 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1350S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1350S Is Used
Long-Stroke Material Transfer
The 1350 mm stroke and 3927 N push force at 0.5 MPa efficiently shuttle heavy pallets or components between distant conveyor stations. The built-in magnet provides reliable end-of-travel confirmation to the PLC via barrel-mounted sensors.
Automated Panel Indexing
Ideal for advancing large workpieces through multi-stage assembly cells. The adjustable cushioning protects tooling at both ends of the 1350 mm stroke, while the 25 mm rod resists buckling under aligned axial loads.
Heavy-Duty Gate or Damper Actuation
Delivers up to 7068 N at 0.9 MPa to open and close large hopper gates or air dampers in bulk material handling. The magnet-equipped barrel simplifies sensor integration in dusty, remote-controlled environments.
Is the Airtac SC100 Standard Cylinder SC100X1350S the Right Cylinder?
Select the SC100 when your application requires force in the 3927 N range at standard plant air pressure. If you need more force, step up to the SC125 bore which provides 6136 N at 0.5 MPa; if your load is lighter and you want a more compact actuator, the SC80 delivers 2513 N at the same pressure. For this 1350 mm stroke, the long unsupported piston rod is susceptible to bending under side loads—always guide the load externally with linear rails or rods, or consider using a guided cylinder to protect the rod bearing from premature wear.
To ensure a correct drop-in replacement, match five key points: 100 mm bore, 1350 mm stroke, PT1/2 port thread, the built-in magnet for sensor compatibility, and the basic (no bracket) mounting configuration. This cylinder is a tie-rod design, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC series tie-rod cylinders of the same specification.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1350S FAQ
At 0.5 MPa, this cylinder provides 3927 N extending (push) and 3681 N retracting (pull). At the maximum operating pressure of 1.0 MPa, the theoretical push force is 801 kgf. The standard operating range is 0.15–1.0 MPa, and the proof pressure is 1.5 MPa.
Yes. The -S suffix in the model code indicates a built-in magnet on the piston. This allows you to clamp compatible AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the tie-rod barrel to detect piston position without additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1350S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.