Airtac SC100 Standard Cylinder SC100X1350SH
The AirTAC Airtac SC100 Standard Cylinder SC100X1350SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 1350mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1350 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1350SH
The AirTAC SC100X1350SH is a double-acting tie-rod cylinder with a 100 mm bore and a long 1350 mm stroke, delivering a push force of 3927 N at 0.5 MPa and up to 7068 N at 0.9 MPa. Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth deceleration for large linear movements.
This model is factory-equipped with a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors, and features high-temperature Viton (FKM) seals (-H), extending the operating range from 0 to +150 °C. The PT1/2 port thread ensures reliable pneumatic connections for demanding automation tasks.
Airtac SC100 Standard Cylinder SC100X1350SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1350SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1350 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1350SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1350SH Is Used
Hot-Zone Material Handling
The Viton seals and 1350 mm stroke make this cylinder ideal for pushers and transfer stations in ovens or drying lines where ambient temperatures exceed 70 °C.
Large Clamping & Forming
With 7068 N of force at 0.9 MPa, it provides the sustained pressure needed for long-stroke clamping, press-fit assembly, or composite forming operations.
Automated Sorting Gates
The built-in magnet enables precise end-of-stroke sensing, critical for controlling large diverters or sorting gates in high-temperature logistics environments.
Is the Airtac SC100 Standard Cylinder SC100X1350SH the Right Cylinder?
For applications requiring more force, stepping up to the 125 mm bore (SC125) provides 6136 N of push force at 0.5 MPa. If a shorter, more compact solution is acceptable, the 80 mm bore (SC80) delivers 2513 N. With a stroke of 1350 mm, ensure the rod is protected from side loads; an external guide or guided cylinder is strongly recommended to prevent rod bending and premature bearing wear. For a direct replacement, match the 100 mm bore, 1350 mm stroke, PT1/2 port thread, built-in magnet, and Viton seal material.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1350SH FAQ
At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
No. The SC100X1350SH is a double-acting cylinder and does not hold its position when air pressure is exhausted or the directional valve is centered. For load holding without live pressure, you must add a pilot-operated check valve or an external mechanical rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1350SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.