verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC100 Standard Cylinder SC100X1350TC

The AirTAC SC100 Standard Cylinder SC100X1350TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 1350mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ100 mm
  • Stroke1350 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$369.18 $376.68Save 1% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC100 stroke, mounting and version on one page All SC100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC100 Standard Cylinder SC100X1350TC

The SC100X1350TC is a double-acting pneumatic cylinder delivering 3927 N push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a 25 mm piston rod, this model provides a substantial force envelope for industrial actuation tasks. The 1350 mm stroke is within the standard range for this bore size, and the adjustable air cushion (29 mm length) decelerates the piston smoothly at end-of-stroke.

This configuration includes a centre trunnion (TC) mount, supplied with the TCM1 bracket (F-SC100TC), allowing the cylinder to pivot during operation—ideal for swinging or articulating loads. The body length A is 188 mm, giving an extended length of approximately 1538 mm. Ports are PT1/2 with an M20x1.5 rod thread, and the standard TPU seals provide reliable service from -20 to +70 °C.

Airtac SC100 Standard Cylinder SC100X1350TC Technical Specifications

ModelAirtac SC100 Standard Cylinder SC100X1350TC
SeriesSC standard tie-rod cylinder
Bore sizeØ100 mm
Stroke1350 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (approx.)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC100 Standard Cylinder SC100X1350TC

SCStandard tie-rod cylinder series.
100Bore size in mm.
×1350Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC100 Standard Cylinder SC100X1350TC Is Used

conveyor_belt

Pivoting Conveyor Gates

The centre trunnion mount lets this cylinder swing with a diverting gate or flipper on a conveyor line, handling the 3927 N push force needed to redirect heavy packages.

precision_manufacturing

Welding Fixture Clamping

Delivers up to 7068 N of clamping force at 0.9 MPa for holding large weldments in a pivoting clamp arm, with the trunnion absorbing the arc of motion.

engineering

Material Handling Tilters

Powers a bin or pallet tilter through a 1350 mm stroke arc, using the TC mount's pivot to smoothly dump bulk materials or orient heavy parts.

Is the Airtac SC100 Standard Cylinder SC100X1350TC the Right Cylinder?

For applications requiring a pivoting mount, the TC centre trunnion is the correct choice, and this model ships ready with the TCM1 bracket. If your load requires a higher force margin, stepping up to the 125 mm bore (SC125) provides 6136 N at 0.5 MPa. For lower force needs, the 80 mm bore (SC80) delivers 2513 N at the same pressure. Always match replacement cylinders on all five key points: 100 mm bore, 1350 mm stroke, PT1/2 port thread, centre trunnion (TC) mount, and the absence of a magnet.

At a 1350 mm stroke, the 25 mm rod is long and susceptible to bending under side loads. Do not use this cylinder to guide or support the load directly; install an external linear guide or rod support to absorb transverse forces and prevent premature rod bearing wear or rod buckling.

AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC100 Standard Cylinder SC100X1350TC FAQ

At 0.7 MPa operating pressure, the theoretical push force is 5497 N. The maximum push force at 0.9 MPa is 7068 N, and at 0.5 MPa it is 3927 N.

No. The AirTAC SC series is a tie-rod cylinder and is dimensionally shorter than an ISO 15552 profile cylinder. It is not a direct interchange. Replace only with another AirTAC SC tie-rod cylinder matching the 100 mm bore, 1350 mm stroke, PT port, and TC trunnion mount.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC100 Standard Cylinder SC100X1350TC

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SC100X1350TC and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.