Airtac SC100 Standard Cylinder SC100X135S
The AirTAC Airtac SC100 Standard Cylinder SC100X135S is a genuine double-acting standard air cylinder with a Ø100mm bore and 135mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke135 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X135S
The SC100X135S is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore, 135 mm stroke, and a 25 mm diameter piston rod, this model is built for medium-to-heavy linear actuation tasks where consistent force and reliable cycling are essential.
The integrated magnet (denoted by the -S suffix) allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for contactless position feedback. This genuine AirTAC tie-rod cylinder features adjustable air cushioning, PT1/2 ports, and TPU seals rated for -20 to +70 °C.
Airtac SC100 Standard Cylinder SC100X135S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X135S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X135S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X135S Is Used
Material Handling Gates
Actuates diverter gates and stops on conveyor lines, using the 3927 N push force at 0.5 MPa to reliably move heavy packages or pallets.
Clamping & Pressing
Provides up to 7068 N of clamping force at 0.9 MPa for assembly fixtures, holding large workpieces during welding or machining.
Sensor-Monitored Automation
The built-in magnet works with CMSG/DMSG sensors to confirm end-of-stroke position in automated pick-and-place or sorting systems.
Is the Airtac SC100 Standard Cylinder SC100X135S the Right Cylinder?
For applications requiring slightly less force, the 80 mm bore SC80 series offers 2513 N at 0.5 MPa, while stepping up to the 125 mm bore provides 6136 N. This SC100X135S is a standard-stroke model, well within the 1500 mm maximum for the 100 mm bore. The built-in magnet simplifies sensor integration without needing external brackets.
When replacing an existing cylinder, match five key points: 100 mm bore, 135 mm stroke, PT1/2 port thread, the built-in magnet (-S), and the basic mounting style. For strokes over 300 mm, consider an external guide to protect the 25 mm rod from side-load bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X135S FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, push force increases to 5497 N, and at the maximum operating pressure of 0.9 MPa, it reaches 7068 N.
Yes. The -S suffix indicates a built-in magnet, making it ready for AirTAC CMSG, DMSG, or EMSG sensors that clamp directly onto the tie-rod barrel for non-contact position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X135S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.