
The AirTAC SC100 Standard Cylinder SC100X135STC is a genuine double-acting standard air cylinder with a Ø100mm bore and 135mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X135STC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and 135 mm stroke, it is built for medium-stroke clamping, pressing, and positioning tasks where substantial force is needed in a compact footprint.
This model features a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, and ships with a centre trunnion pivot (TC mount, bracket F-SC100TC + TCM1) for swinging loads. The 25 mm diameter piston rod, PT1/2 ports, and 29 mm adjustable air cushion ensure smooth deceleration. Total body length is 188 mm plus stroke.
| Model | Airtac SC100 Standard Cylinder SC100X135STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 135 mm stroke and 3927 N force at 0.5 MPa make this cylinder ideal for welding jigs and machining fixtures that require firm, repeatable clamping on a production line.
Delivers up to 7068 N at 0.9 MPa for light pressing, stamping, or forming operations. The adjustable cushion absorbs impact at end-of-stroke, protecting tooling.
The centre trunnion mount (TC) allows the cylinder to pivot during actuation, perfect for linkages, dump mechanisms, and tilting platforms. The built-in magnet enables easy end-of-stroke sensing.
Choose the SC100 bore when your application needs roughly 4000 N at standard shop air. If your force requirement is closer to 2500 N, step down to the SC80 bore (2513 N push at 0.5 MPa). For heavy side loads or strokes over 300 mm, consider an external guide or a guided cylinder to protect the rod bearing from bending stress.
For direct replacement, match these five attributes: 100 mm bore, 135 mm stroke, PT port thread, centre trunnion (TC) mounting, and the built-in magnet (-S) for sensor compatibility. This tie-rod cylinder is shorter than an ISO 15552 profile and is not dimensionally interchangeable with that standard.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder that is shorter in overall length than an ISO 15552 cylinder. A direct replacement must match the SC100 bore, 135 mm stroke, PT1/2 ports, centre trunnion (TC) mount, and built-in magnet. Using an ISO 15552 cylinder will result in dimensional interference.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.