
The AirTAC SC100 Standard Cylinder SC100X1370S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1370mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1370S is a double-acting tie-rod cylinder delivering a substantial 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 1370 mm stroke is within the standard range for the 100 mm bore, making it a readily available solution for long linear movements.
This model features a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG sensors to be mounted directly on the barrel for non-contact position sensing. The 25 mm diameter piston rod and 29 mm adjustable air cushion at each end ensure smooth deceleration, while the PT1/2 port thread provides reliable pneumatic connections.
| Model | Airtac SC100 Standard Cylinder SC100X1370S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1370 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1370 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 1370 mm stroke and 3927 N force at 0.5 MPa are ideal for pushing heavy pallets or boxes off a conveyor line in a distribution center.
Provides a long, controlled clamping motion for large workpieces in a machining fixture, with the built-in magnet enabling end-of-stroke confirmation.
Used in large weaving or cutting machines where a long, consistent linear stroke is required, and the magnetic piston allows for precise cycle timing.
When selecting a cylinder for a 1370 mm stroke, ensure the rod is adequately supported against side loads, as the 25 mm rod can be susceptible to bending under high lateral forces; consider an external guide or a guided cylinder for such applications. If a higher force is needed, stepping up to the SC125 bore provides 6136 N at 0.5 MPa.
For a direct replacement, match the 100 mm bore, 1370 mm stroke, PT1/2 port thread, and the built-in magnet (-S). This is a tie-rod cylinder and will directly replace another AirTAC SC100 of the same configuration.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. The maximum operating push force at 0.9 MPa is 7068 N.
Yes. The -S suffix in the model code indicates a built-in magnet. You can clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder barrel for position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.