verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC100 Standard Cylinder SC100X1370SN

The AirTAC SC100 Standard Cylinder SC100X1370SN is a genuine double-acting standard air cylinder with a Ø100mm bore and 1370mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ100 mm
  • Stroke1370 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$345.66 $353.16Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC100 stroke, mounting and version on one page All SC100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC100 Standard Cylinder SC100X1370SN

The AirTAC SC100X1370SN is a double-acting tie-rod cylinder delivering a substantial push force of 3927 N at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and an extended 1370 mm stroke, it is engineered for applications requiring long linear travel with consistent pneumatic power. The 25 mm diameter piston rod and 29 mm adjustable air cushion work together to manage end-of-stroke deceleration effectively.

This model features a built-in magnet (suffix -S) for direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors, enabling precise position feedback along the full stroke. The NBR (nitrile) seals offer reliable performance within the standard temperature range of -20 to +70 °C. Ports are threaded PT 1/2, and the body length A is 188 mm, resulting in a total extended length of approximately 1558 mm.

Airtac SC100 Standard Cylinder SC100X1370SN Technical Specifications

ModelAirtac SC100 Standard Cylinder SC100X1370SN
SeriesSC standard tie-rod cylinder
Bore sizeØ100 mm
Stroke1370 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (approx.)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC100 Standard Cylinder SC100X1370SN

SCStandard tie-rod cylinder series.
100Bore size in mm.
×1370Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC100 Standard Cylinder SC100X1370SN Is Used

conveyor_belt

Long-Stroke Material Transfer

Pushes or pulls heavy totes and pallets across wide conveyor transfer stations, using the full 1370 mm reach and magnetic piston sensing for end-point confirmation.

precision_manufacturing

Automated Panel Tilter

Provides the long, controlled stroke needed to tilt large solar panels or sheet metal assemblies from horizontal to vertical on a production line, with adjustable cushioning for a smooth stop.

warehouse

Bin Diverter Gate Actuation

Operates a large diverter gate in bulk material handling chutes, where the 3927 N force at 0.5 MPa is sufficient to move the gate against flowing product, and the NBR seals handle dusty environments.

Is the Airtac SC100 Standard Cylinder SC100X1370SN the Right Cylinder?

Select the SC100 when your application requires a force class around 3927 N at standard plant pressure. For a step down in size, the SC80 bore provides 2513 N of push force at 0.5 MPa, while stepping up to the SC125 bore delivers 6136 N. For this 1370 mm stroke, which approaches the maximum standard stroke of 1500 mm for this bore, careful load alignment is critical. Long, unsupported strokes are susceptible to rod bending under side loads; use an external guide rail or rod-alignment coupler to protect the rod bearing and seals.

To ensure a correct replacement, match five key points: 100 mm bore, 1370 mm stroke, PT 1/2 port thread, the built-in magnet (-S) for sensor compatibility, and the basic mounting configuration. This SC cylinder is a tie-rod design and is dimensionally shorter than an ISO 15552 profile cylinder, so it is not a direct replacement for those types.

AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC100 Standard Cylinder SC100X1370SN FAQ

At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.

Yes. The -S suffix in the model code indicates a built-in magnet on the piston. This allows you to clamp compatible AirTAC CMSG, DMSG, or EMSG sensors directly onto the cylinder barrel's tie-rod slots to detect piston position without additional brackets.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC100 Standard Cylinder SC100X1370SN

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SC100X1370SN and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.