
The AirTAC SC100 Standard Cylinder SC100X1390S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1390mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X1390S is a double-acting single-rod pneumatic cylinder from the AirTAC SC tie-rod series, delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a long 1390 mm stroke, it is built for applications that need substantial force over an extended linear distance.
This model features a 25 mm diameter piston rod with an M20x1.5 rod thread and PT1/2 port connections. The integrated -S magnet allows direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for reliable end-of-stroke detection. The body length A is 188 mm, and the adjustable air cushion (29 mm) helps decelerate the piston smoothly at the end of travel.
| Model | Airtac SC100 Standard Cylinder SC100X1390S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1390 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1390 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pushes or pulls heavy components along a 1390 mm path on packaging or assembly lines, with sensor feedback confirming each full cycle.
Delivers 3927 N at 0.5 MPa to advance large sheet materials or workpieces into a stamping press or CNC station over a long feed distance.
Operates heavy gates, chutes, or diverters on agricultural machinery, using the built-in magnet for position sensing in dusty environments.
For applications requiring slightly less force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa, while stepping up to the 125 mm bore SC125 series offers 6136 N. At a 1390 mm stroke, the rod is highly extended; ensure side loads are minimal or use an external linear guide to protect the rod bearing from bending moments and premature seal wear. When replacing this cylinder, match five key points: 100 mm bore, 1390 mm stroke, PT port thread, the basic mounting configuration, and the -S magnet for sensor compatibility.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
For strokes over 300 mm, especially with a 25 mm rod, avoid direct side loads. Mount the cylinder so the load is guided externally by rails or bearings, preventing bending stress on the rod and extending seal life.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.