verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC100 Standard Cylinder SC100X1400SLB

The AirTAC SC100 Standard Cylinder SC100X1400SLB is a genuine double-acting standard air cylinder with a Ø100mm bore and 1400mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ100 mm
  • Stroke1400 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$352.44 $359.94Save 2% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC100 stroke, mounting and version on one page All SC100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC100 Standard Cylinder SC100X1400SLB

The SC100X1400SLB is a double-acting tie-rod cylinder delivering 3927 N push and 3681 N pull at 0.5 MPa, rising to 7068 N push at 0.9 MPa. With a 100 mm bore and 1400 mm stroke, this model includes a built-in magnet (S) and LB foot mounting brackets (F-SC100LB) for secure surface installation. The 25 mm diameter piston rod and PT1/2 ports handle high-flow pneumatic circuits with ease.

This long-stroke cylinder uses an adjustable air cushion (29 mm length) to decelerate end-of-stroke travel, protecting the end caps. The tie-rod construction allows straightforward maintenance, and the TPU seals provide reliable operation from -20 to +70 °C. For position sensing, the integrated magnet lets you clamp CMSG or DMSG sensors directly onto the barrel without extra brackets.

Airtac SC100 Standard Cylinder SC100X1400SLB Technical Specifications

ModelAirtac SC100 Standard Cylinder SC100X1400SLB
SeriesSC standard tie-rod cylinder
Bore sizeØ100 mm
Stroke1400 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (approx.)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC100 Standard Cylinder SC100X1400SLB

SCStandard tie-rod cylinder series.
100Bore size in mm.
×1400Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC100 Standard Cylinder SC100X1400SLB Is Used

warehouse

Pallet Transfer Systems

Moves heavy pallets across roller beds in automated warehouses. The 1400 mm stroke covers long transfer distances, while the foot mount provides stable, fixed positioning.

precision_manufacturing

Heavy-Duty Clamping Fixtures

Applies 7068 N of clamping force at 0.9 MPa for welding or assembly jigs. The built-in magnet enables end-of-stroke confirmation via reed sensors.

conveyor_belt

Long-Stroke Part Pushers

Pushes large components off a main conveyor line. The adjustable cushion absorbs the high inertia of a 100 mm bore piston moving at speed over a 1400 mm stroke.

Is the Airtac SC100 Standard Cylinder SC100X1400SLB the Right Cylinder?

For a 100 mm bore at 0.5 MPa, expect 3927 N push force. If your load is lighter, stepping down to an 80 mm bore (2513 N push) can reduce air consumption and cost. For heavier loads, the 125 mm bore provides 6136 N push at the same pressure. Always match the replacement cylinder on all five critical points: 100 mm bore, 1400 mm stroke, PT port thread, LB foot mounting, and the -S magnet for sensor compatibility.

At 1400 mm stroke, the unsupported rod length is significant. Side loads or off-centre mounting can bend the 25 mm rod or wear the bearing. Use an external linear guide or a guided cylinder configuration when the load is not perfectly axial, and ensure the foot mounts are aligned on a flat, rigid surface to prevent binding.

AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC100 Standard Cylinder SC100X1400SLB FAQ

At 0.7 MPa operating pressure, this 100 mm bore cylinder generates 5497 N of push force and 5153 N of pull force. The theoretical maximum force at 1.0 MPa is 801 kgf.

No. The AirTAC SC series is a tie-rod cylinder and is shorter in overall length than an ISO 15552 profile cylinder of the same stroke. It is a direct dimensional match only for another AirTAC SC tie-rod cylinder with the same bore, stroke, port thread, mounting, and magnet option.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC100 Standard Cylinder SC100X1400SLB

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SC100X1400SLB and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.