Airtac SC100 Standard Cylinder SC100X1400STC
The AirTAC Airtac SC100 Standard Cylinder SC100X1400STC is a genuine double-acting standard air cylinder with a Ø100mm bore and 1400mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1400 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1400STC
The AirTAC SC100X1400STC is a double-acting single-rod tie-rod cylinder delivering 3927 N of push force at 0.5 MPa, scaling up to 7068 N at the maximum operating pressure of 0.9 MPa. Its 1400 mm stroke, combined with a 25 mm diameter piston rod and a 29 mm adjustable air cushion, makes it a robust choice for long linear movements in material handling and heavy-duty automation.
This model includes a built-in magnet for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke detection without external brackets. The TC centre trunnion mount (supplied with the TCM1 bracket, part code F-SC100TC) allows the cylinder to pivot, absorbing misalignment in swinging or articulating load applications.
Airtac SC100 Standard Cylinder SC100X1400STC Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1400STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1400 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1400STC
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1400STC Is Used
Pallet Transfer Systems
The 1400 mm stroke and pivoting TC mount are ideal for transferring heavy pallets between conveyor lines, with the sensor confirming full extension and retraction.
Heavy-Duty Clamping Fixtures
Delivers up to 7068 N of clamping force for securing large weldments or castings, where the trunnion mount allows the cylinder to swing clear for part loading.
Diverter Gates
Used on gravity or powered roller conveyors to divert large, heavy packages. The adjustable cushion decelerates the 25 mm rod smoothly at the end of the long stroke.
Is the Airtac SC100 Standard Cylinder SC100X1400STC the Right Cylinder?
Select the SC100 bore when your application requires a push force between 3927 N (at 0.5 MPa) and 7068 N (at 0.9 MPa). If your force requirement is lower, stepping down to an 80 mm bore provides 2513 N at 0.5 MPa, saving space and air consumption. For higher forces, the 125 mm bore offers 6136 N at the same pressure. At a 1400 mm stroke, the rod is fully supported within the standard stroke range for this bore, but always ensure the load is guided externally if any significant side forces are present to prevent rod bending and premature seal wear. For a direct replacement, match the 100 mm bore, 1400 mm stroke, PT port thread, TC centre trunnion mounting, and the built-in magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1400STC FAQ
At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder with a shorter body length than an ISO 15552 cylinder and is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC100 tie-rod cylinder with the same bore, stroke, PT port, TC mount, and magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1400STC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.