
The AirTAC SC100 Standard Cylinder SC100X1400TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 1400mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X1400TC is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (up to 7068 N at 0.9 MPa). Its 1400 mm stroke suits long-travel material transfer and large gate actuation, with a 25 mm diameter piston rod providing robust linear guidance.
This model features a centre trunnion (TC) mount, supplied with the TCM1 bracket (F-SC100TC), allowing the cylinder to pivot during operation. The adjustable air cushion (29 mm) decelerates the piston smoothly at stroke ends, protecting the end caps from impact damage.
| Model | Airtac SC100 Standard Cylinder SC100X1400TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1400 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1400 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pushes or pulls heavy pallets and components across 1400 mm spans in automated conveyor lines, leveraging 3927 N of force at standard shop air.
Operates heavy sliding gates or air dampers in bulk handling and HVAC systems, with the TC trunnion mount absorbing the pivoting motion.
Provides the long reach and high force needed for clamping large weldments or structural assemblies, where the cylinder body must swing to clear the part.
For higher force, step up to the SC125 bore (6136 N at 0.5 MPa); for a more compact option, the SC80 delivers 2513 N. At 1400 mm stroke, ensure the rod is supported against side loads—consider an external linear guide or switch to a guided cylinder if bending moments are present. When replacing, match bore (100 mm), stroke (1400 mm), PT port thread, TC centre trunnion mount, and the optional magnet requirement.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa (5 bar) it provides 3927 N push and 3681 N pull. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100 is a tie-rod cylinder and is dimensionally shorter than an ISO 15552 profile cylinder, so it is not a direct interchange. It replaces another AirTAC SC100 tie-rod cylinder with matching bore, stroke, PT ports, and TC mount.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.