
The AirTAC SC100 Standard Cylinder SC100X1410S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1410mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1410S is a double-acting pneumatic cylinder with a 100 mm bore and a 1410 mm stroke, delivering a substantial push force of 3927 N at 0.5 MPa. This model includes a built-in magnet, allowing direct mounting of CMSG, DMSG, or EMSG sensors on the barrel for precise, non-contact position sensing. Its 25 mm diameter rod and PT1/2 port ensure robust flow for demanding linear motion tasks.
With a body length (A) of 188 mm, the total extended length reaches approximately 1598 mm. The adjustable air cushion, with a 29 mm cushion length, decelerates the piston smoothly at the stroke ends, protecting the end caps from impact. Operating on 40 µm filtered air, this tie-rod cylinder is rated for 0.15-1.0 MPa and features standard TPU seals for a -20 to +70 °C temperature range.
| Model | Airtac SC100 Standard Cylinder SC100X1410S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1410 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1410 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pushes or pulls heavy pallets and bins across wide conveyor gaps with a 1410 mm reach, using the built-in magnet for mid-stroke sensor flags.
Positions large weldments or tooling plates with a 3927 N clamping force at 0.5 MPa, with sensors confirming full extension and retraction.
Operates a heavy sliding gate or diverter chute in a dusty plant, where the tie-rod design is easy to clean and the magnet enables sealed sensor mounting.
Select the SC100X1410S when your application requires a 100 mm bore force class and a long 1410 mm stroke. For higher force, the SC125 bore steps up to 6136 N at 0.5 MPa; for a more compact option, the SC80 provides 2513 N. At this stroke length, the unsupported rod is subject to bending under side loads; always use an external linear guide or rod-alignment coupler to protect the rod bearing and seals.
To ensure a correct replacement, match five key points: the 100 mm bore, the 1410 mm stroke, the PT1/2 port thread, the built-in magnet (-S suffix), and the basic mounting configuration. This is not an ISO 15552 cylinder; it is a tie-rod design and is dimensionally interchangeable only with another AirTAC SC100 tie-rod cylinder of the same specifications.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, it produces 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
No. The SC100X1410S is a double-acting cylinder and will drift or drop if pressure is exhausted. For load holding without live pressure, you must add a pilot-operated check valve or an external rod brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.