
The AirTAC SC100 Standard Cylinder SC100X1450S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1450mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1450S is a double-acting single-rod tie-rod cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa operating pressure. With a 100 mm bore, 25 mm piston rod, and a long 1450 mm stroke, it is built for applications that need substantial linear force over an extended travel distance.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for reliable end-of-stroke or mid-position sensing. The adjustable air cushion (29 mm cushion length) decelerates the piston smoothly at both ends, and the PT1/2 port thread ensures straightforward pneumatic plumbing. The total extended body length is approximately 1638 mm (188 mm body length A + 1450 mm stroke).
| Model | Airtac SC100 Standard Cylinder SC100X1450S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1450 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1450 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Moves heavy pallets or large sheets across wide conveyor gaps with 3927 N of force at 0.5 MPa, using the 1450 mm stroke for extended reach.
Applies consistent clamping pressure up to 7068 N at 0.9 MPa for laminating or bonding large panels, with magnetic sensors confirming full closure.
Pushes heavy bins or cartons off accumulation lanes in distribution centers, leveraging the long 1450 mm stroke and robust 25 mm rod.
Choose the SC100X1450S when your application requires approximately 3927 N at 0.5 MPa. If you need more force, step up to the SC125 bore (6136 N push at 0.5 MPa); for a lighter, more compact solution, the SC80 bore provides 2513 N. For this 1450 mm stroke, side-load and rod-bearing bending must be managed carefully—consider an external linear guide or a guided cylinder if the rod will experience off-axis forces. To ensure a correct replacement, match five points: 100 mm bore, 1450 mm stroke, PT port thread, the built-in magnet (-S), and the basic mounting configuration.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
Long unsupported strokes are sensitive to rod bending under side load. Use an external linear guide or rod support to absorb transverse forces, or consider an AirTAC guided cylinder. The adjustable air cushion only decelerates the piston—it does not hold the load.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.