Airtac SC100 Standard Cylinder SC100X1470S
The AirTAC Airtac SC100 Standard Cylinder SC100X1470S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1470mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1470 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1470S
The SC100X1470S is a double-acting pneumatic cylinder delivering 3927 N push force at 0.5 MPa and up to 7068 N at 0.9 MPa operating pressure. Its 100 mm bore pairs with a 25 mm piston rod and PT1/2 ports, while the 1470 mm stroke sits within the 1500 mm maximum standard stroke for this bore size.
A built-in magnet (suffix -S) allows direct mounting of CMSG/DMSG/EMSG reed or solid-state sensors on the tie-rod barrel for contactless end-of-stroke detection. The adjustable air cushion at each end decelerates the piston over a 29 mm cushion length, reducing impact without locking the load.
Airtac SC100 Standard Cylinder SC100X1470S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1470S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1470 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1470S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1470 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1470S Is Used
Long-Stroke Material Transfer
Pushes or pulls heavy pallets and bins across wide conveyor gaps. The 1470 mm stroke moves loads in one smooth motion without intermediate stops.
Automated Welding Fixtures
Positions large weldments or tooling carriages with repeatable end-of-stroke sensing via the built-in magnet and barrel-mounted sensors.
Dock Leveler Actuation
Operates heavy dock levelers or lifting platforms. The 0.9 MPa thrust of 7068 N handles steep incline loads in logistics centres.
Is the Airtac SC100 Standard Cylinder SC100X1470S the Right Cylinder?
Choose the SC100 when your application needs roughly 3927 N at 0.5 MPa; if you can accept 2513 N, stepping down to an SC80 reduces air consumption and physical size. For strokes approaching 1500 mm, always check side-load conditions—long, unsupported rods bend under lateral force. Add an external linear guide or switch to a guided cylinder when the rod is subject to off-axis loads.
For drop-in replacement, match five points: 100 mm bore, 1470 mm stroke, PT1/2 ports, basic mounting (no factory-fitted bracket), and the -S magnet for sensor compatibility. The SC is a tie-rod design and is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1470S FAQ
At 0.5 MPa, push force is 3927 N and pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnet, so you can clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the cylinder barrel to detect piston position without external brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1470S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.