Airtac SC100 Standard Cylinder SC100X1500H
The AirTAC Airtac SC100 Standard Cylinder SC100X1500H is a genuine double-acting standard air cylinder with a Ø100mm bore and 1500mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1500 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1500H
The SC100X1500H is a robust double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a long 1500 mm stroke, it is built for demanding linear applications requiring substantial force over an extended travel distance.
This model features a 25 mm diameter piston rod and a 29 mm adjustable air cushion for smooth deceleration. The 'H' suffix specifies high-temperature Viton (FKM) seals, extending the operating temperature range to 0–150°C, making it suitable for hot environments. The total extended body length is 1688 mm (188 mm body length A + 1500 mm stroke).
Airtac SC100 Standard Cylinder SC100X1500H Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1500H |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1500 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1500H
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1500H Is Used
Heavy Part Transfer
Moves large components or pallets across a 1.5-meter span in automated lines, using its 3927 N force at standard plant pressure.
Press and Clamping
Provides high-force clamping for welding fixtures or assembly jigs, with Viton seals ensuring reliability in high-temperature manufacturing cells.
Material Handling Pusher
Acts as a long-stroke pusher for diverting heavy loads on roller conveyors, where the adjustable cushion protects the system from impact damage.
Is the Airtac SC100 Standard Cylinder SC100X1500H the Right Cylinder?
For applications needing less force, consider stepping down to an 80 mm bore (2513 N at 0.5 MPa). If more force is required, the 125 mm bore offers 6136 N at the same pressure. For this 1500 mm stroke, side-load management is critical; the long, unsupported 25 mm rod is susceptible to bending under lateral forces. Always use an external guide or a guided cylinder for non-axial loads.
To ensure a direct replacement, match these five key specifications: 100 mm bore, 1500 mm stroke, PT port thread, basic (no) mounting, and no built-in magnet. This tie-rod cylinder is not dimensionally interchangeable with ISO 15552 profiles.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1500H FAQ
At 0.5 MPa, the push force is 3927 N. The force increases to 5497 N at 0.7 MPa and reaches a maximum of 7068 N at the operating limit of 0.9 MPa.
A 25 mm rod extended to 1500 mm is vulnerable to bending and bearing wear under side load. You must install an external linear guide or use a guided cylinder assembly to absorb transverse forces and protect the rod and seals.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1500H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.