Airtac SC100 Standard Cylinder SC100X1500LB
The AirTAC Airtac SC100 Standard Cylinder SC100X1500LB is a genuine double-acting standard air cylinder with a Ø100mm bore and 1500mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1500 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1500LB
The SC100X1500LB is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and a 1500 mm stroke—the maximum standard length for this bore—it provides consistent linear thrust for long-travel applications. The 25 mm diameter piston rod and 29 mm air cushion at each end ensure smooth deceleration even under high cycle rates.
This model includes the LB foot mounting (F-SC100LB), bolting securely to a machine base for stable, axial operation. The body length A is 188 mm, giving a total extended length of approximately 1688 mm. Ports are PT1/2, and the rod thread is M20x1.5. Operating pressure ranges from 0.15 to 1.0 MPa with standard TPU seals rated for -20 to +70 °C.
Airtac SC100 Standard Cylinder SC100X1500LB Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1500LB |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1500 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1500LB
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1500 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1500LB Is Used
Long-Stroke Material Transfer
Pushes or pulls heavy pallets and components across wide conveyor gaps, leveraging the full 1500 mm stroke and 3927 N of force at 0.5 MPa.
Industrial Press Feed
Advances large sheet metal or composite blanks into stamping presses, where the 29 mm cushion absorbs impact at the end of the rapid 1500 mm travel.
Automated Diverter Gates
Operates tall diverter gates in logistics sortation systems, using the LB foot mount for rigid, floor-supported installation.
Is the Airtac SC100 Standard Cylinder SC100X1500LB the Right Cylinder?
Choose the SC100 when your application needs around 3927 N of force at 0.5 MPa. If you require less force, the SC80 bore provides 2513 N at the same pressure; for more, the SC125 delivers 6136 N. The 1500 mm stroke is at the standard limit for this bore—longer strokes require a non-standard order.
At this stroke length, the unsupported rod is susceptible to bending under side loads. Always use an external guide or linear rail to absorb transverse forces, preventing rod bearing wear and seal failure. For direct replacement, match bore (100), stroke (1500), PT port thread, LB foot mounting, and ensure the replacement is a genuine AirTAC SC tie-rod cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1500LB FAQ
At 0.5 MPa it produces 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, pushing force increases to 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder, not an ISO 15552 profile cylinder. It is physically shorter and dimensionally different. Replace only with another AirTAC SC100 tie-rod cylinder matching the 1500 mm stroke, PT1/2 ports, and LB foot mount.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1500LB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.