Airtac SC100 Standard Cylinder SC100X150N
The AirTAC Airtac SC100 Standard Cylinder SC100X150N is a genuine double-acting standard air cylinder with a Ø100mm bore and 150mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke150 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X150N
The SC100X150N is a robust 100 mm bore double-acting pneumatic cylinder delivering a push force of 3927 N at 0.5 MPa (up to 7068 N at 0.9 MPa). With a 150 mm stroke, it is well-suited for medium-reach clamping, pressing, and material-handling tasks where a substantial force footprint is needed.
This model is fitted with NBR (nitrile) seals, offering reliable performance across the standard temperature range of -20 to +70 °C. The 25 mm diameter piston rod and 29 mm adjustable air cushion at each end provide smooth deceleration, while the PT1/2 port threads ensure straightforward pneumatic connections.
Airtac SC100 Standard Cylinder SC100X150N Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X150N |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X150N
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X150N Is Used
Pallet Stop & Lift
The 3927 N push force at 0.5 MPa easily raises or stops heavy pallets on conveyor lines, providing reliable material flow control in packaging and logistics centres.
Heavy-Duty Clamping
Ideal for welding fixtures and assembly jigs, the SC100X150N applies consistent, high clamping pressure to secure large workpieces during fabrication or machining.
Press-Fit Assembly
Delivers the controlled linear force needed for pressing bearings, bushings, or pins into housings, with the adjustable cushion protecting tooling at the end of the 150 mm stroke.
Is the Airtac SC100 Standard Cylinder SC100X150N the Right Cylinder?
Select the SC100 when your application needs roughly 4000 N of push force at standard shop air. If your load is closer to 2500 N, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For strokes of 300 mm or more, evaluate side-load conditions on the 25 mm rod—an external guide or a guided cylinder is recommended to protect the rod bearing from bending moments.
When replacing an existing cylinder, match five points: 100 mm bore, 150 mm stroke, PT port thread, basic (no bracket) mounting, and no magnet. This ensures a direct dimensional and performance swap with another AirTAC SC tie-rod cylinder.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X150N FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 cylinder, so it is not dimensionally interchangeable. It directly replaces another AirTAC SC100 tie-rod cylinder with the same bore, stroke, port thread, and mounting configuration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X150N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.