
The AirTAC SC100 Standard Cylinder SC100X150SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 150mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X150SH is a double-acting single-rod pneumatic cylinder delivering 3927 N push force at 0.5 MPa and up to 7068 N at 0.9 MPa. With a 100 mm bore and 150 mm stroke, it uses a 25 mm diameter piston rod with M20x1.5 male threads and PT1/2 ports, making it a robust actuator for medium-to-heavy industrial tasks.
The -S suffix denotes a built-in magnet, allowing easy mounting of CMSG, DMSG, or EMSG reed and solid-state sensors directly on the tie-rod barrel for precise position feedback. The -H suffix specifies Viton (FKM) seals, extending the operating temperature range to 0–150 °C, ideal for hot environments like foundries or autoclaves. This model’s body length A is 188 mm, with a total extended length of approximately 338 mm.
| Model | Airtac SC100 Standard Cylinder SC100X150SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The Viton seals handle continuous ambient heat up to 150°C, making this cylinder reliable for actuating slide gates or diverters near furnaces and ovens.
With the built-in magnet and compatible CMSG/DMSG sensors, you can verify end-of-stroke position for automated clamping fixtures, ensuring cycle completion in CNC or welding cells.
The 3927 N push force at 0.5 MPa easily ejects heavy castings or packed boxes from a conveyor line, providing a durable alternative to less robust actuators.
Choose the SC100 bore when your application needs around 3927 N at 0.5 MPa. If you can work with less force, stepping down to an SC80 reduces the push force to 2513 N at the same pressure, saving space and air consumption. For higher demands, the SC125 delivers 6136 N at 0.5 MPa.
For a 150 mm stroke, side-load concerns are minimal, but always align the rod with the load path to prevent premature bearing wear. To replace an existing cylinder, match five points: 100 mm bore, 150 mm stroke, PT1/2 ports, the built-in magnet (-S), and the Viton seal material (-H). This is a tie-rod cylinder, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC100 units.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.7 MPa operating pressure, this 100 mm bore cylinder generates a push force of 5497 N. The maximum push force at the 0.9 MPa upper limit is 7068 N.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder. It is dimensionally interchangeable only with another AirTAC SC100 tie-rod cylinder matching the 150 mm stroke, PT ports, magnet, and Viton seals.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.