Airtac SC100 Standard Cylinder SC100X150SN
The AirTAC Airtac SC100 Standard Cylinder SC100X150SN is a genuine double-acting standard air cylinder with a Ø100mm bore and 150mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke150 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X150SN
The SC100X150SN is a double-acting pneumatic cylinder delivering a substantial 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). Its 100 mm bore and 150 mm stroke suit medium-travel clamping, pressing, and heavy-duty positioning tasks where high force is needed in a compact tie-rod body.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to clamp directly onto the barrel for end-of-stroke detection. NBR seals (-N) provide reliable sealing for standard industrial air, and the PT1/2 port thread ensures straightforward pneumatic connections.
Airtac SC100 Standard Cylinder SC100X150SN Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X150SN |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X150SN
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X150SN Is Used
Heavy Part Rejection
Pushes defective products off a high-speed conveyor with 3927 N of force, triggered by a CMSG sensor confirming full extension.
Assembly Press
Provides the 0.9 MPa thrust of 7068 N for pressing bearings or bushings into housings on a semi-automated assembly station.
Clamping Fixture
Locks workpieces for welding or machining; the built-in magnet confirms the clamp is fully engaged before the cycle starts.
Is the Airtac SC100 Standard Cylinder SC100X150SN the Right Cylinder?
For applications needing slightly less force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa, while the 125 mm bore steps up to 6136 N. At a 150 mm stroke, side loading is typically minimal, but always centre the load on the rod axis and consider an external guide if off-axis forces are present. When replacing, match bore (100 mm), stroke (150 mm), PT port thread, the built-in magnet, and the basic mounting configuration to ensure drop-in compatibility.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X150SN FAQ
At 0.5 MPa, it provides 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix denotes a built-in magnet, making it fully compatible with AirTAC CMSG, DMSG, and EMSG series sensors that clamp onto the tie-rod barrel.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X150SN
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.