Airtac SC100 Standard Cylinder SC100X1700SH
The AirTAC Airtac SC100 Standard Cylinder SC100X1700SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 1700mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1700 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1700SH
The AirTAC SC100X1700SH is a double-acting, single-rod pneumatic cylinder with a 100 mm bore and an extended 1700 mm stroke, a made-to-order length beyond the standard 1500 mm maximum. It delivers a substantial push force of 3927 N at 0.5 MPa and 7068 N at the maximum operating pressure of 0.9 MPa, placing it in a high-force class for demanding linear motion.
This model is configured with a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors and features high-temperature Viton (FKM) seals (-H suffix), extending the operating range to 0–150 °C. The 25 mm diameter rod and 29 mm adjustable air cushion are standard for the 100 mm bore, which uses PT1/2 ports.
Airtac SC100 Standard Cylinder SC100X1700SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1700SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1700 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1700SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1700 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1700SH Is Used
High-Temperature Actuation
Operating foundry clamps or kiln door mechanisms where ambient temperatures up to 150°C would degrade standard seals, leveraging the Viton seal package.
Long-Stroke Material Pusher
Moving heavy pallets or product stacks across a 1700 mm distance on a conveyor transfer car, using the high force at 0.7 MPa (5497 N) for reliable pushing.
Sensor-Monitored Press Feed
Feeding large sheets into a thermoforming press with end-of-stroke confirmation via barrel-mounted sensors, ensuring complete cycle verification.
Is the Airtac SC100 Standard Cylinder SC100X1700SH the Right Cylinder?
Select the SC100 when your application requires forces in the 3927 N (push at 0.5 MPa) range. If this force is excessive, stepping down to an 80 mm bore reduces push force to 2513 N. For this 1700 mm stroke, a non-standard length, side-load management is critical; an external guide or a guided cylinder is strongly recommended to protect the 25 mm rod and rod bearing from bending moments. For a direct replacement, match the 100 mm bore, 1700 mm stroke, PT1/2 ports, built-in magnet, and Viton seals.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1700SH FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No, a 1700 mm stroke with a 25 mm rod is highly susceptible to side-load bending. An external guide rail or rod-alignment coupler is essential to prevent rod bearing damage and ensure reliable operation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1700SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.