
The AirTAC SC100 Standard Cylinder SC100X1750S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1750mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1750 is a double-acting pneumatic cylinder with a 100 mm bore and an extended 1750 mm stroke, built for applications requiring substantial reach. At 0.5 MPa it delivers 3927 N of push force, scaling to 7068 N at the 0.9 MPa maximum operating pressure, placing it in a high-force class for heavy linear actuation.
This is a non-standard stroke exceeding the 1500 mm standard maximum for the 100 mm bore, making it a made-to-order configuration. The cylinder uses a 25 mm diameter piston rod with an M20x1.5 male thread, PT1/2 port connections, and a 29 mm adjustable air cushion at each end to decelerate the moving mass. The tie-rod body length A is 188 mm, giving a total extended length of approximately 1938 mm.
| Model | Airtac SC100 Standard Cylinder SC100X1750S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1750 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Extends 1750 mm across wide conveyor beds to divert heavy pallets or large packages, using 3927 N of force at standard plant pressure.
Operates large gates, chutes, or bale handling arms on farming machinery where a long stroke and robust force are needed in dirty environments.
Transfers large steel sheets or heavy components into a stamping press or forming machine, leveraging the 7068 N maximum push force at 0.9 MPa.
Choose the SC100 when the 50 mm bore's 982 N at 0.5 MPa is insufficient but the 125 mm bore's 6136 N is excessive for your load. For this 1750 mm stroke, the long unsupported rod is susceptible to bending under side load; install an external linear guide or switch to a guided cylinder if the load is not purely axial. For a direct replacement, match five points: 100 mm bore, 1750 mm stroke, PT1/2 ports, basic mounting (no bracket), and no magnet. This model uses standard TPU seals and PT threads.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa the theoretical push force is 3927 N and pull force is 3681 N. At 0.7 MPa push is 5497 N. The maximum push at 0.9 MPa operating pressure is 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
A 25 mm rod extending 1750 mm must be guided externally if any side load is present. Mount the load on a linear rail or use a rod-alignment coupler. For high side loads, consider a guided cylinder or a larger bore with a thicker rod instead of relying on the rod bearing alone.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.