Airtac SC100 Standard Cylinder SC100X1750SH
The AirTAC Airtac SC100 Standard Cylinder SC100X1750SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 1750mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1750 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1750SH
The SC100X1750SH is a double-acting pneumatic cylinder delivering 3927 N of push force at 0.5 MPa and up to 7068 N at 0.9 MPa operating pressure. With a 100 mm bore, 25 mm piston rod, and a 1750 mm stroke, this non-standard length extends the SC series' capability for long-reach linear actuation in demanding environments.
This model features a built-in magnet (-S suffix) for direct mounting of CMSG/DMSG/EMSG sensors, enabling precise end-of-stroke or mid-position detection. The -H suffix specifies Viton (FKM) seals, shifting the operating temperature range to 0 to +150 °C, making it suitable for high-temperature applications where standard TPU seals would degrade.
Airtac SC100 Standard Cylinder SC100X1750SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1750SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1750 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1750SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1750SH Is Used
High-Temperature Material Handling
The Viton seals allow this cylinder to operate reliably in ovens, autoclaves, or near heat sources up to 150 °C, pushing heavy loads over a long 1750 mm stroke.
Foundry & Metalworking Actuation
With a 7068 N push force at 0.9 MPa, it can move heavy molds, gates, or fixtures in hot, aggressive environments where standard seals would fail.
Long-Reach Pusher Systems
Ideal for pushing large products off a conveyor line. The built-in magnet sensor confirms full extension and retraction over the 1.75-meter travel distance.
Is the Airtac SC100 Standard Cylinder SC100X1750SH the Right Cylinder?
For applications requiring less force, the 80 mm bore SC80 series provides 2513 N at 0.5 MPa. If higher force is needed, the 125 mm bore SC125 series offers 6136 N at the same pressure. Always match bore, stroke, port thread (PT), and mounting accessories when replacing an existing cylinder.
Given the exceptionally long 1750 mm stroke, side-load management is critical. The 25 mm rod is susceptible to bending under lateral forces at full extension. An external linear guide or a guided cylinder configuration is strongly recommended to prevent rod bearing damage and ensure reliable operation. Confirm the rod bearing's bending moment capacity from the datasheet for this non-standard stroke.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1750SH FAQ
At 0.5 MPa, the theoretical push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
It is not recommended. A 1750 mm stroke with a 25 mm rod creates a high risk of rod buckling and side-load damage. An external guide or a guided cylinder is required to absorb lateral forces and protect the rod bearing, especially at full extension.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1750SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.