
The AirTAC SC100 Standard Cylinder SC100X1750TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 1750mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1750TC is a double-acting tie-rod cylinder delivering 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa). With a 100 mm bore and an extended 1750 mm stroke, this non-standard length cylinder is built for applications requiring long linear travel. The 25 mm diameter piston rod and 29 mm adjustable air cushion help manage end-of-stroke deceleration.
This model is factory-configured with a TC centre trunnion mount (includes TCM1 bracket, order code F-SC100TC), allowing the cylinder to pivot during operation. It uses standard PT ports (PT1/2), TPU seals for a -20 to +70 °C range, and has a body length A of 188 mm. Note that this stroke exceeds the standard 1500 mm maximum, making it a made-to-order item.
| Model | Airtac SC100 Standard Cylinder SC100X1750TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1750 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1750 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 1750 mm stroke moves heavy pallets or panels across wide conveyor gaps, with the centre trunnion mount allowing the cylinder to swing as the load transfers.
Provides the sustained push force needed to clamp or position large weldments in automotive or agricultural equipment manufacturing jigs.
Pivots a tall diverter gate in bulk material handling lines, using the trunnion mount to accommodate the arc of motion without side-loading the rod.
Select the SC100 when your application needs around 3927 N at 0.5 MPa. If a lower force suffices, the SC80 bore provides 2513 N at the same pressure in a smaller envelope. For higher force, the SC125 bore steps up to 6136 N. At this 1750 mm stroke, side-load and rod-bearing bending are critical concerns—always use an external guide or a guided cylinder to protect the 25 mm rod from deflection. For replacement, match bore (100 mm), stroke (1750 mm), PT1/2 port thread, TC centre trunnion mounting, and the non-magnetic specification exactly.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa the cylinder pushes with 3927 N and pulls with 3681 N. At 0.7 MPa push force is 5497 N, and at the maximum operating pressure of 0.9 MPa it reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. At 1750 mm stroke, the 25 mm rod is highly susceptible to bending under side loads. An external guide rail or a rodless/guided cylinder configuration is mandatory to prevent rod damage and seal failure.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.