
The AirTAC SC100 Standard Cylinder SC100X175H is a genuine double-acting standard air cylinder with a Ø100mm bore and 175mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X175H is a double-acting tie-rod cylinder with a 100 mm bore and 175 mm stroke, built with high-temperature Viton (FKM) seals for reliable operation in environments from 0 to +150 °C. It delivers a push force of 3927 N at 0.5 MPa and up to 7068 N at 0.9 MPa, making it suitable for demanding industrial actuation.
This model features a 25 mm diameter piston rod, PT1/2 port threads, and an adjustable air cushion of 29 mm to decelerate the piston smoothly at stroke end. The body length A is 188 mm, giving a total extended length of approximately 363 mm. As a genuine AirTAC SC cylinder, it is a non-ISO 15552 tie-rod design, shorter than a profile cylinder of the same bore.
| Model | Airtac SC100 Standard Cylinder SC100X175H |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The Viton seals withstand 150 °C steam sterilization cycles, making this cylinder ideal for opening and closing autoclave or sterilizer chamber doors.
Delivers 7068 N of clamping force at 0.9 MPa for heated platen presses in composite curing or rubber molding, where standard seals would degrade.
Operates reliably in high-ambient-temperature foundry environments to actuate sand mold knock-out mechanisms or shakeout grids.
Select the SC100X175H for applications needing up to 3927 N of force at standard plant pressure. If your load requires less force, stepping down to an 80 mm bore reduces push force to 2513 N at 0.5 MPa. For higher force demands, the 125 mm bore offers 6136 N. The 175 mm stroke is within the standard range for this bore, but always ensure the rod is not subjected to side loads; for strokes over 300 mm, consider an external guide system. When replacing, match bore, stroke, PT port thread, basic mounting, and note the Viton seal material.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
No, the SC100X175H is a double-acting cylinder and will not hold its position if air pressure is exhausted or the directional valve is centered. The piston will drift. For load holding, an external rod lock or pilot-operated check valve is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.