Airtac SC100 Standard Cylinder SC100X175N
The AirTAC Airtac SC100 Standard Cylinder SC100X175N is a genuine double-acting standard air cylinder with a Ø100mm bore and 175mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke175 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X175N
The AirTAC SC100X175N is a double-acting tie-rod cylinder delivering a substantial 3927 N push force at 0.5 MPa, increasing to 7068 N at the maximum operating pressure of 0.9 MPa. With a 100 mm bore and a 175 mm stroke, this model is built for heavy pushing, clamping, and pressing tasks in industrial automation. The 25 mm diameter piston rod provides excellent rigidity, and the adjustable air cushion (29 mm length) ensures smooth deceleration at the end of each stroke.
This variant is fitted with NBR (nitrile) seals, offering reliable performance within the standard temperature range of -20 to +70 °C. The body length A is 188 mm, resulting in a compact extended length of approximately 363 mm. Ports are standard PT1/2 threads. As a genuine AirTAC component, it is engineered for consistent, long-life operation in demanding pneumatic systems.
Airtac SC100 Standard Cylinder SC100X175N Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X175N |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X175N
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X175N Is Used
Pallet Stop & Transfer
Deploys 3927 N of force at 0.5 MPa to reliably stop and position heavy pallets on conveyor lines, ensuring precise transfer points in material handling systems.
Heavy-Duty Clamping
Provides the high force needed for pneumatic clamping fixtures in machining and welding, securely holding large workpieces during fabrication processes.
Press & Assembly Tools
Ideal for powering small pneumatic presses and assembly stations, delivering up to 7068 N at 0.9 MPa for pressing bearings, bushings, or rivets into place.
Is the Airtac SC100 Standard Cylinder SC100X175N the Right Cylinder?
Select the SC100X175N for applications requiring a force of around 4000 N at standard plant pressure. If your load demands more force, stepping up to the SC125 bore provides 6136 N of push force at the same 0.5 MPa. For lower force requirements, the SC80 bore delivers 2513 N. This 175 mm stroke is well within the 1500 mm maximum standard stroke for the 100 mm bore. For any stroke over 300 mm, assess side-loading risks on the rod bearing; an external guide or guided cylinder is recommended to prevent rod bending and ensure long seal life. To match this cylinder for a replacement, verify the 100 mm bore, 175 mm stroke, PT1/2 port thread, NBR seal material, and the basic (no bracket) mounting configuration.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X175N FAQ
At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
No. The AirTAC SC series is a tie-rod cylinder and is physically shorter than an ISO 15552 profile cylinder, so it is not dimensionally interchangeable. It is a direct replacement only for another AirTAC SC tie-rod cylinder with the same 100 mm bore, 175 mm stroke, PT1/2 ports, NBR seals, and basic mounting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X175N
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.