verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SC Series · Standard Cylinder

Airtac SC100 Standard Cylinder SC100X175SN

The AirTAC SC100 Standard Cylinder SC100X175SN is a genuine double-acting standard air cylinder with a Ø100mm bore and 175mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.

  • BoreØ100 mm
  • Stroke175 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 29 mm
$117.21 $124.71Save 6% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SC100 stroke, mounting and version on one page All SC100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SC100 Standard Cylinder SC100X175SN

The SC100X175SN is a double-acting tie-rod cylinder with a 100 mm bore and 175 mm stroke, delivering a push force of 3927 N at 0.5 MPa and up to 7068 N at 0.9 MPa. Its 25 mm diameter piston rod and 29 mm adjustable air cushion provide smooth deceleration for mid-stroke automation tasks.

This model is configured with a built-in magnet (-S suffix) for direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors, enabling precise end-of-stroke detection. The NBR (nitrile) seals (-N suffix) offer reliable performance within the standard -20 to +70 °C temperature range, making it a practical choice for general industrial environments.

Airtac SC100 Standard Cylinder SC100X175SN Technical Specifications

ModelAirtac SC100 Standard Cylinder SC100X175SN
SeriesSC standard tie-rod cylinder
Bore sizeØ100 mm
Stroke175 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 29 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (approx.)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SC100 Standard Cylinder SC100X175SN

SCStandard tie-rod cylinder series.
100Bore size in mm.
×175Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.

Where the Airtac SC100 Standard Cylinder SC100X175SN Is Used

conveyor_belt

Material Handling & Transfer

Pushes heavy totes or pallets on a roller conveyor. The 3927 N force at 0.5 MPa easily moves loaded containers, while the built-in magnet confirms full extension and retraction to prevent collisions.

precision_manufacturing

Clamping & Assembly Fixtures

Applies 7068 N of clamping force at 0.9 MPa for welding jigs or assembly presses. The 25 mm rod resists bending under direct axial loads, ensuring repeatable part alignment.

compress

Waste Compaction Equipment

Drives a compaction plate in small recycling balers. The adjustable cushion absorbs impact at the end of the 175 mm stroke, reducing wear when compacting materials like cardboard or plastic.

Is the Airtac SC100 Standard Cylinder SC100X175SN the Right Cylinder?

For applications requiring more force, consider stepping up to the SC125 bore, which provides 6136 N at 0.5 MPa. If a shorter overall length is needed, the SC80 bore offers 2513 N at the same pressure. The 175 mm stroke is well within the 1500 mm maximum standard stroke for this bore.

When replacing an existing cylinder, ensure a 5-point match: 100 mm bore, 175 mm stroke, PT port thread, NBR seal material, and the presence of a magnetic piston for sensor compatibility. The SC100 is a tie-rod design, not an ISO 15552 profile, so dimensional interchangeability is limited to other AirTAC SC100 tie-rod cylinders.

AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SC100 Standard Cylinder SC100X175SN FAQ

At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.

Yes. The -S suffix in the model code indicates a built-in magnet on the piston. This allows you to clamp AirTAC CMSG, DMSG, or EMSG sensors directly onto the barrel tie-rods to detect piston position without external brackets.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SC Cylinders

Request a Quote for Airtac SC100 Standard Cylinder SC100X175SN

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SC100X175SN and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.