
The AirTAC SC100 Standard Cylinder SC100X175TC is a genuine double-acting standard air cylinder with a Ø100mm bore and 175mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X175TC is a double-acting pneumatic cylinder with a 100 mm bore and 175 mm stroke, supplied with a centre trunnion (TC) mount for pivoting applications. At 0.5 MPa it generates 3927 N pushing force, and at the maximum operating pressure of 0.9 MPa the thrust reaches 7068 N.
This model uses a 25 mm diameter piston rod with an M20x1.5 male thread and PT1/2 port connections. The adjustable air cushion at each end is 29 mm long, and the body length A is 188 mm, giving a total extended length of approximately 363 mm. Standard operating temperature range is -20 to +70 °C with the default TPU seals.
| Model | Airtac SC100 Standard Cylinder SC100X175TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 175 mm stroke and centre trunnion mount allow this cylinder to pivot a diverter gate on a packaging or sorting conveyor, handling the 3927 N push force to redirect product flow reliably.
With 7068 N of clamping force available at 0.9 MPa, the SC100X175TC secures heavy fabrications in welding jigs. The trunnion mount lets the cylinder swing clear for easy part loading and unloading.
Used on harvesters or spreaders to pivot chutes and discharge spouts. The tie-rod construction and PT ports suit typical mobile hydraulic-pneumatic conversions, and the standard TPU seals handle dusty outdoor conditions.
For a 100 mm bore, the SC100 series provides 3927 N at 0.5 MPa. If your application needs more force, step up to the SC125 bore (6136 N at 0.5 MPa); for a lighter, more compact solution, the SC80 bore delivers 2513 N at the same pressure. The 175 mm stroke is within the standard range for this bore (max 1500 mm).
To replace an existing cylinder, match five points: 100 mm bore, 175 mm stroke, PT1/2 port thread, centre trunnion mounting (F-SC100TC), and confirm the magnet option (this code has no -S magnet). The centre trunnion allows the cylinder to pivot during operation, making it ideal for loads that move through an arc.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa the pushing force is 3927 N and the pulling force is 3681 N. At 0.7 MPa the push force increases to 5497 N, and at the maximum operating pressure of 0.9 MPa it reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
No. The SC100X175TC is a standard double-acting cylinder and will not hold position when air pressure is exhausted or the directional valve is centered—the piston can drift. For load holding without live pressure, you must add an external rod lock, a pilot-operated check valve, or a mechanical brake.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.