
The AirTAC SC100 Standard Cylinder SC100X1780S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1780mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1780S is a double-acting single-rod pneumatic cylinder with a 100 mm bore and an extended 1780 mm stroke, which exceeds the standard maximum of 1500 mm and is manufactured as a non-standard order. It delivers a push force of 3927 N at 0.5 MPa and 7068 N at the maximum operating pressure of 0.9 MPa, driven by a 25 mm diameter piston rod.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be mounted directly on the tie-rod barrel for precise position feedback. The standard TPU seals provide an operating temperature range of -20 to +70 °C, and the PT1/2 port threads ensure straightforward pneumatic connections.
| Model | Airtac SC100 Standard Cylinder SC100X1780S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1780 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1780 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Moves heavy bins or pallets across wide conveyor gaps, using its 1780 mm reach and 3927 N push force at 0.5 MPa for reliable transfer operations.
Positions large weldments or tooling with a long, controlled stroke. The built-in magnet provides end-of-stroke confirmation via DMSG sensors in automated cells.
Operates tall diverter gates in bulk material handling lines, using its high force capacity and sensor-ready design for sequenced, high-cycle sorting tasks.
For applications requiring a force between the 2513 N of the 80 mm bore and the 6136 N of the 125 mm bore, the SC100 is the optimal choice. The 1780 mm stroke is non-standard and requires careful management of side loads; an external guide or a guided cylinder is strongly recommended to protect the 25 mm rod and rod bearing from bending moments.
When replacing this cylinder, match the 100 mm bore, 1780 mm stroke, PT1/2 port thread, basic mounting configuration, and the integrated magnet sensor option to ensure full functional compatibility with your existing setup.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, it provides 3927 N pushing and 3681 N pulling. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
A stroke of 1780 mm on a 25 mm rod is highly susceptible to side loading and buckling. You must use an external linear guide or switch to a guided cylinder assembly to absorb transverse forces and protect the rod bearing from premature wear and bending.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.