
The AirTAC SC100 Standard Cylinder SC100X1800 is a genuine double-acting standard air cylinder with a Ø100mm bore and 1800mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1800 is a double-acting tie-rod cylinder with a 100 mm bore and an extended 1800 mm non-standard stroke, built for applications requiring a long linear reach. Operating on filtered air at 0.15-1.0 MPa, it generates a substantial push force of 3927 N at 0.5 MPa and up to 7068 N at 0.9 MPa, driven by a 25 mm diameter piston rod.
With a body length of 188 mm and a 29 mm adjustable air cushion, this cylinder decelerates high-inertia loads smoothly at the end of its travel. The 1800 mm stroke exceeds the standard 1500 mm maximum for the 100 bore, making this a made-to-order configuration. It features a PT1/2 port and an M20x1.5 rod thread for robust mechanical connections.
| Model | Airtac SC100 Standard Cylinder SC100X1800 |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1800 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Extends 1800 mm to push heavy pallets or large components off a conveyor line, using its 3927 N force at 0.5 MPa to handle substantial industrial loads.
Feeds oversized wood or metal panels into a stamping press. The 29 mm cushion absorbs the kinetic energy of the moving tooling, preventing impact damage at the stroke end.
Provides the long, powerful stroke needed to tilt heavy bulk bins or hoppers for material discharge, leveraging the cylinder's 7068 N maximum thrust at 0.9 MPa.
Select the SC100 bore when your application requires a push force around 3927 N at 0.5 MPa. If your load is lighter, stepping down to an SC80 bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For higher force demands, the SC125 bore offers 6136 N at the same pressure.
For this 1800 mm stroke, side-load management is critical. A long, unsupported 25 mm rod is susceptible to bending under lateral forces; always use an external guide system or ensure the load is perfectly axial. When replacing this cylinder, match five key points: the 100 mm bore, the 1800 mm stroke, the PT1/2 port thread, the basic mounting configuration, and the absence of a magnet.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
The theoretical push force is 3927 N at 0.5 MPa and 7068 N at the maximum operating pressure of 0.9 MPa. The pull force on the retract stroke is slightly lower, at 3681 N at 0.5 MPa, due to the area of the 25 mm rod.
No, the maximum standard stroke for an SC100 bore is 1500 mm. An 1800 mm stroke is a non-standard, made-to-order configuration. For such a long stroke, an external guide mechanism is strongly recommended to protect the rod and bearing from side-load bending.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.