
The AirTAC SC100 Standard Cylinder SC100X1800S is a genuine double-acting standard air cylinder with a Ø100mm bore and 1800mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X1800S is a double-acting single-rod pneumatic cylinder with a 100 mm bore and an extra-long 1800 mm stroke, made to order as it exceeds the standard 1500 mm maximum. It generates a substantial 3927 N of push force at 0.5 MPa (7068 N at 0.9 MPa), making it suitable for heavy linear actuation over long distances.
This model features a built-in magnet (denoted by the -S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the tie-rod barrel for precise position feedback. The 25 mm diameter rod, PT1/2 port, and 29 mm adjustable air cushion ensure reliable end-of-stroke deceleration. The body length A is 188 mm, giving a total extended length of approximately 1988 mm.
| Model | Airtac SC100 Standard Cylinder SC100X1800S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1800 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Pushes heavy pallets or product carriers across wide gaps in automated conveyor lines where a 1.8-meter reach is essential.
Applies 7068 N of clamping force at 0.9 MPa to secure large weldments or assemblies in a fixture, with sensor confirmation of jaw position.
Operates chutes, gates, or diverters on large harvesting or processing equipment, using the magnet for end-of-travel feedback in dusty conditions.
Choose the SC100 for its 3927 N push force at 0.5 MPa. If your load requires more force, step up to the SC125 bore (6136 N at 0.5 MPa); for a lighter, more compact solution, the SC80 provides 2513 N. At this 1800 mm stroke, the unsupported rod is highly susceptible to bending under side loads—always use an external linear guide or rod-alignment coupler to protect the rod bearing and seals. For a direct replacement, match the 100 mm bore, 1800 mm stroke, PT1/2 ports, basic mount, and ensure the replacement also has the -S magnet option for sensor compatibility.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
For any stroke over 300 mm, especially 1800 mm, side loads can cause the rod to bend or damage the bearing. Always guide the load externally with a rail system or use a rod-alignment coupler. Never rely on the cylinder rod alone to bear lateral forces.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.