
The AirTAC SC100 Standard Cylinder SC100X180SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 180mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X180SH is a double-acting single-rod pneumatic cylinder with a 100 mm bore and 180 mm stroke, factory-equipped with a built-in magnet (-S) and high-temperature Viton (FKM) seals (-H). At 0.5 MPa it pushes with 3927 N, and at the maximum operating pressure of 0.9 MPa thrust rises to 7068 N, placing it in a force class suited for heavy pressing, clamping, and lifting tasks.
This model uses a 25 mm diameter piston rod with M20x1.5 male threads and PT1/2 ports. The adjustable air cushion (29 mm length) decelerates the piston near stroke end to reduce impact. The Viton seals shift the operating temperature range to 0 to +150 °C, making this cylinder suitable for hot environments where standard TPU seals would degrade. Total extended body length is approximately 368 mm.
| Model | Airtac SC100 Standard Cylinder SC100X180SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Viton seals allow continuous operation in ambient temperatures up to 150 °C, ideal for foundry equipment, autoclaves, or hot-press tooling where standard seals would fail.
With 7068 N of force available at 0.9 MPa, this cylinder provides the high clamping pressure needed for CNC fixture tables and assembly jigs.
The built-in magnet enables direct mounting of CMSG or DMSG sensors on the tie-rod barrel for end-of-stroke detection without external flags or brackets.
For applications needing slightly less force, the 80 mm bore SC80 series delivers 2513 N push at 0.5 MPa. If your load exceeds 3927 N at 0.5 MPa, step up to the 125 mm bore which provides 6136 N. The 180 mm stroke is well within the 1500 mm maximum standard stroke for this bore. When replacing an existing unit, match five points: 100 mm bore, 180 mm stroke, PT port thread, the built-in magnet (-S) for sensor compatibility, and the Viton seal material for high-temperature operation. The basic mounting configuration accepts standard AirTAC foot, flange, or clevis accessories.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa the push force is 3927 N and pull force is 3681 N. At 0.7 MPa push is 5497 N, and at the maximum operating pressure of 0.9 MPa it reaches 7068 N. The theoretical maximum at 1.0 MPa is 801 kgf.
Yes. The -S suffix indicates a built-in magnetic piston, so AirTAC CMSG (reed) and DMSG/EMSG (solid-state) sensors can be clamped directly onto the cylinder barrel for reliable position feedback.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.