
The AirTAC SC100 Standard Cylinder SC100X180STC is a genuine double-acting standard air cylinder with a Ø100mm bore and 180mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC100X180STC delivers a substantial 3927 N of push force at 0.5 MPa, making it a robust choice for medium-to-heavy pneumatic applications. This double-acting cylinder features a 25 mm diameter piston rod and PT1/2 ports, with a body length of 188 mm plus the 180 mm stroke for a compact yet powerful package.
Equipped with a built-in magnet and centre trunnion (TC) mount, this model is ready for sensor feedback and pivoting motion. The adjustable air cushion at each end decelerates the piston smoothly, and the standard TPU seals provide reliable operation from -20 to +70 C.
| Model | Airtac SC100 Standard Cylinder SC100X180STC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 180 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×180 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Moves heavy components between conveyor lines, using the trunnion mount to swing a transfer arm through a fixed arc.
Applies high, consistent clamping force in welding jigs or assembly fixtures, with sensor confirmation of the clamped position.
Provides the push force for a small pneumatic press, ideal for bearing insertion or light forming tasks requiring controlled motion.
With 3927 N of force at 0.5 MPa, the SC100 bore is a step up from the SC80 (2513 N) for higher load demands, while the SC125 (6136 N) offers even greater thrust if needed. The 180 mm stroke is well within the 1500 mm maximum standard stroke for this bore.
For replacement, match five key points: 100 mm bore, 180 mm stroke, PT port thread, centre trunnion mount (F-SC100TC bracket included), and the built-in magnet for sensor compatibility. Always ensure the load is guided externally if side forces are present, as tie-rod cylinders are designed for axial push/pull.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
No. As a standard double-acting cylinder, it will drift or drop if pressure is lost or the valve is centered. For load holding, you must add an external rod brake, a mechanical lock, or a pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.