Airtac SC100 Standard Cylinder SC100X184S
The AirTAC Airtac SC100 Standard Cylinder SC100X184S is a genuine double-acting standard air cylinder with a Ø100mm bore and 184mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke184 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X184S
The SC100X184S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 184 mm stroke. It generates a substantial push force of 3927 N at 0.5 MPa and up to 7068 N at 0.9 MPa, making it a robust actuator for medium-to-heavy industrial tasks.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for reliable end-of-stroke detection. The cylinder features a 25 mm diameter piston rod with M20x1.5 threads, PT1/2 ports, and a 29 mm adjustable air cushion to decelerate the piston smoothly. The body length A is 188 mm, giving a total extended length of approximately 372 mm.
Airtac SC100 Standard Cylinder SC100X184S Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X184S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 184 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X184S
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×184 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X184S Is Used
Heavy Part Clamping
The 3927 N force at 0.5 MPa securely clamps large weldments or castings in machining fixtures, with the built-in magnet providing clamp confirmation via barrel-mounted sensors.
Pallet Stop & Lift
Ideal for stopping or lifting heavy pallets on conveyor lines. The 184 mm stroke provides ample lift height, and the adjustable cushion absorbs impact at the end of travel.
Press & Assembly Tools
Delivers up to 7068 N of push force for bearing insertion, riveting, or light forming operations in automated assembly cells, with sensor feedback for cycle control.
Is the Airtac SC100 Standard Cylinder SC100X184S the Right Cylinder?
Choose the SC100 bore when your application needs push forces in the 3927 N (at 0.5 MPa) to 7068 N (at 0.9 MPa) range. If your load is lighter, stepping down to an SC80 bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For heavier demands, the SC125 bore provides 6136 N at the same 0.5 MPa pressure.
At a 184 mm stroke, the 25 mm rod is well-supported against buckling under axial loads. However, avoid direct side loading on the rod; use an external linear guide if lateral forces are present. For replacement, match five key points: 100 mm bore, 184 mm stroke, PT1/2 port thread, the built-in magnet (-S), and the basic mounting style.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X184S FAQ
At the standard operating pressure of 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
Yes. The -S suffix in the model code SC100X184S indicates a built-in magnet is installed in the piston. This allows you to clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel tie-rods to detect piston position without any additional brackets.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X184S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.