Airtac SC100 Standard Cylinder SC100X1900SH
The AirTAC Airtac SC100 Standard Cylinder SC100X1900SH is a genuine double-acting standard air cylinder with a Ø100mm bore and 1900mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
- BoreØ100 mm
- Stroke1900 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 29 mm
About the Airtac SC100 Standard Cylinder SC100X1900SH
The AirTAC SC100X1900SH is a double-acting, single-rod tie-rod cylinder with a 100 mm bore and an extended 1900 mm non-standard stroke. It generates a substantial push force of 3927 N at 0.5 MPa and up to 7068 N at the maximum operating pressure of 0.9 MPa, making it suitable for demanding linear actuation tasks over a long working distance.
This specific model is configured with a built-in magnet (-S) for direct mounting of CMSG/DMSG/EMSG sensors and features Viton (FKM) seals (-H), which shift the operating temperature range to 0 to +150 °C for reliable performance in high-heat environments. The 25 mm diameter rod provides robust force transmission, and the adjustable pneumatic cushion (29 mm length) decelerates the piston smoothly at the end of its travel.
Airtac SC100 Standard Cylinder SC100X1900SH Technical Specifications
| Model | Airtac SC100 Standard Cylinder SC100X1900SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 1900 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SC100 Standard Cylinder SC100X1900SH
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×1900 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Where the Airtac SC100 Standard Cylinder SC100X1900SH Is Used
High-Temperature Process Actuation
With Viton seals rated for 0-150°C, this cylinder is ideal for actuating dampers, gates, or diverters in ovens, dryers, and foundries where standard seals would fail.
Long-Reach Material Handling
The 1900 mm stroke provides the extended reach needed for pushing heavy pallets or large components on and off conveyor lines in automated warehouses.
Sensor-Monitored Heavy Tooling
The built-in magnet allows for precise end-of-stroke detection with CMSG sensors, ensuring reliable cycle confirmation for heavy press tooling or clamping fixtures.
Is the Airtac SC100 Standard Cylinder SC100X1900SH the Right Cylinder?
Selecting the SC100X1900SH means specifying a high-force cylinder for a very long stroke application. If 3927 N of push force at 0.5 MPa is more than required, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and physical size. For even higher force demands, the 125 mm bore model offers 6136 N at the same pressure.
For a stroke of 1900 mm, managing side loads is critical. The long, unsupported 25 mm rod is susceptible to bending under lateral forces. An external guide or a self-guided cylinder is strongly recommended to protect the rod bearing and seals from premature wear. For replacement, ensure an exact match for the 100 mm bore, 1900 mm stroke, PT port thread, built-in magnet, and Viton seal material.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SC100 Standard Cylinder SC100X1900SH FAQ
At the standard 0.5 MPa operating pressure, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 7068 N.
No, 1900 mm is a non-standard, made-to-order stroke. The maximum standard stroke for a 100 mm bore SC cylinder is 1500 mm. To prevent the long 25 mm rod from buckling or bending under side load, you must use an external linear guide or support the rod externally.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SC100 Standard Cylinder SC100X1900SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.