
The AirTAC SC100 Standard Cylinder SC100X190S is a genuine double-acting standard air cylinder with a Ø100mm bore and 190mm stroke, PT1/2 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC100X190S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 100 mm bore with a 190 mm stroke. It generates a substantial push force of 3927 N at 0.5 MPa and up to 7068 N at 0.9 MPa operating pressure, making it a strong performer for medium-to-heavy linear actuation tasks.
This model features a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors along the barrel for non-contact position sensing. The 25 mm diameter piston rod and PT1/2 port thread ensure robust air flow, while the 29 mm adjustable air cushion at each end decelerates the load smoothly, protecting the end caps during high-cycle operation.
| Model | Airtac SC100 Standard Cylinder SC100X190S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø100 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 29 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (approx.) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 3927 N push force at 0.5 MPa reliably actuates heavy diverter gates and sortation paddles in material handling lines. The built-in magnet provides end-of-stroke confirmation via barrel-mounted sensors.
Operates interlocking safety guards and shields on large mechanical presses. The adjustable cushion decelerates the heavy guard panel smoothly, preventing impact damage at the end of the 190 mm travel.
Clamps large weldments in position with high force. The -S magnet allows sensor feedback to the PLC, ensuring the clamp is fully extended before the welding cycle starts, improving process safety.
Choose the SC100X190S when your application needs the 3927 N push force at 0.5 MPa that a 100 mm bore provides. If your load is lighter, stepping down to an 80 mm bore (2513 N at 0.5 MPa) can reduce air consumption and cost. For heavier loads, the 125 mm bore delivers 6136 N at the same pressure. Always match a replacement cylinder on five points: 100 mm bore, 190 mm stroke, PT port thread, the built-in magnet (-S), and your required mounting accessory.
At a 190 mm stroke, the 25 mm rod is well-supported within the standard stroke range, but any significant side load still requires an external guide rail or a guided cylinder to prevent rod bearing damage and ensure linear motion accuracy.
AirtacDistr lists every SC100 order code with its price on one page at https://airtacdistr.com/products/airtac-sc100-tie-rod-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At the maximum operating pressure of 0.9 MPa, push force increases to 7068 N. The theoretical maximum force at 1.0 MPa is 801 kgf.
Yes. The -S suffix in the model code indicates a built-in magnet is installed on the piston. This allows you to directly clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors onto the cylinder barrel's sensor slot to detect piston position without any additional mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.